- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
BADGER METER ModMag M2000 1" Electromagnetic Flow Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Badger Meter M-2000 electromagnetic flow meter combines a flow detector and amplifier, creating a versatile, user-friendly flow metering system for general purpose applications. Electromagnetic flow meters have inherent advantages over other flow technologies and can accurately meter liquids that are highly corrosive, very viscous, contain a moderate amount of solids or require special handling. The M-2000 can be used in the majority of industrial flow applications and is especially suited for food and beverage, pharmaceutical, water and wastewater, and chemical applications.
The Badger Meter M-2000 flow detector-- which includes the flow tube, isolating liner and measuring electrodes-- is available in sizes from 1/4" (0.02 to 5 gpm) to 54" (980 to 292,700 gpm). Designed, developed and manufactured under strict quality standards, the M-2000 detector has no parts in the flow stream resulting in no pressure loss. Also, accuracy is not affected by temperature, pressure, viscosity, density or flow profile. With no moving parts there is practically no maintenance required. A wide selection of liner and electrode materials helps ensure maximum compatibility and minimum maintenance over a long operating period.
The Badger Meter M-2000 amplifier-- which is the electronic device responsible for the signal processing, flow calculation, display and output signals-- features sophisticated, processor-based signal conversion with accuracies of ±0.25%. The amplifier includes programmable and scalable analog outputs, four configurable digital outputs, pulse outputs and frequency output. Flow data and programmable parameters as well as diagnostic messages are displayed on the backlit 4-line x 20-character LCD. The display also serves to guide users through the simple programming routines. The amplifier can be either meter or remote mounted.
Features
Sizes: 1/4” (0.02 to 5gpm) to 54” (980 to 292,700gpm)
Accuracy: ±0.25%
Minimum conductivity: ≥5 micromhos/cm
Accuracy independent of fluid viscosity, density and temperature
Power supply: 85-265 VAC
AMR- and SCADA-ready outputs
Pulsed DC magnetic field for zero point stability
No pressure loss for low operational costs
Corrosion resistant liners for long life
Integral and remote signal converter availability
Optional grounding rings or grounding electrode