PULSAR GREYLINE DFM 6.1 Ultrasonic Doppler Flow Meter

Rp. 125,000,000

NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

The Greyline Instruments DFM 6.1 Doppler Flow Meter is a simple, non-contact meter designed for applications that would defeat regular contacting flow meters. Because the sensor is mounted on the outside of the pipe, it is unaffected by abrasives or harsh chemicals making it ideal for wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The DFM 6.1 is recommended for full pipes and any fluid that contains solids or bubbles.

The DFM 6.1 clamp-on sensor is mounted on the outside of any pipe 1/2in / 12.7mm diameter or larger. To measure velocity an acoustic signal is reflected back to the sensor from moving particles or gas bubbles suspended in the fluid. Flow is calculated based on configured pipe ID.

Features:
Flow rate: ±0.1 to 40 ft/sec (±0.03 to 12.2 m/sec)
Pipe size: 1/2 to 180in (12.7mm to 4.5m)
Accuracy ±2%:
Requires solids or bubbles of at least 100 microns
75ppm concentration
±0.1%, Linearity ±0.5% of full scale repeatability
Large, backlit LCD display
16-Digit totalizer
Reverse flow measurement
Isolated 4-20mA (1000 ohm load max)
2 programmable control relays
26 Million Point Data Logger

What's In The Box:
(1) Power supply
(1) Transducer mounting hardware
(1) Transducer cable
(1) Installation and operation manual