- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
DEFELSKO PosiTest CMM Portable Concrete Moisture Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Concrete Moisture Meter
The Defelsko PosiTest CMM is a concrete moisture meter that non-destructively measures the moisture content of concrete in accordance with ATSM F2659 (Standard Test Method for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement, and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter).
Features of the PosiTest CMM:
Ergonomic, lightweight design with durable rubberized grip
Easy-to-read display; Instant measurements with no drilling
Storage of 200 readings - viewed or downloaded via USB
Includes free PosiSoft Desktop software for analyzing, reporting data
Three measurement modes:
Continuous mode - constantly updates the display
Hold Max mode - displays max reading until saved or reset
Hold Max and Save mode - waits for reading to stabilize then autosaves to memory
IP65 rated enclosure
Powered by (2) AAA batteries
Conforms to ASTM F2659
Fast response precision sensors provide instant readings
Includes Check Standard to verify operation
Calibrated with concrete standards measured gravimetrically; Test Certificate included
Concrete Moisture Meter
Non-destructive concrete moisture measurements in accordance with ASTM F2659
Calibrated with concrete standards measured gravimetrically
Store up to 200 readings
Includes PosiSoft Desktop software for analyzing, reporting data (via USB)
IP65 rated – dust and water jet resistance
Includes Check Standard to verify operation
Measurement modes: Continuous, Hold Max, and Hold Max and Save
Measurement scales: 0 to 6% Concrete Moisture Content; 0 to 4% Carbide Method; 0 to 100 Relative
Accuracy: +/- 0.5% Moisture Content of Concrete
Temperature range: 40°F to 105°F
In The Box
PosiTest CMM - Concrete Moisture Meter
(2) AAA batteries
Instructions
Protective rubber cap
Check Standard
Calibration Test Certificate
USB cable
Nylon carrying case with shoulder strap