DAKOTA NDT MX2-DL Corrosion Thickness Gauge

Dakota NDT MX2-DL (MVX) [Z-149-0006] Corrosion Thickness Gauge with Data Logging with T-102-2700 Probe. The Dakota MX2-DL/MVX offers a range of advanced features including A-Scan, B-Scan as well as a full alphanumeric data logging system with storage capacity of hundreds of thousands of data values ​​and A-scan capture. No software required. The MX2-DL/MVX features the highest resolution graphic LCD on the market and is specifically designed for optimum ease of use. It is available as a complete kit with all accessories in a carrying case with data transfer cable and NIST Traceable Calibration Certificate.

Specification:
PHYSICAL:
Weight: 13.5 ounces (with batteries).
Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
Operating Temperature: -14˚ to 140˚F (-10˚ to 60˚C).
Keyboard: Membrane switch with twelve tactile keys.
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Display: 1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert).
ULTRASONIC SPECIFICATIONS:
Measurement Modes: Pulse-Echo (flaws, pits). Echo-Echo (thru-paint).
Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or AGC gain control with 50dB range, depending on mode selected.
Timing: Precision TCXO timing with single shot. 100MHz 8 bit ultra low power digitizer. Pulse Repetition Frequency - 250Hz.
DISPLAY
Display Views: A-Scan: Rectified +/- (flaw view) RF (full waveform view). Refresh rate at 25Hz.
B-Scan: Time based cross section view.
Display speed variable (10 to 200 readings per second).
Large Digits: Standard thickness view; Digit
Height: 0.700 in (17.78mm).
Scan Bar: Speed 10Hz. Viewable in B-Scan and Large Digit views.
Bar Graph: Indicates stability of measurement.
POWER SOURCE:
Line power: USB to PC or power outlet.
Batteries: Three AA cells. Alkaline - 35 hrs, Nicad - 10 hrs and NI-MH - 35hrs.
Auto power off if idle 5 minutes.
Battery status icon.
MEASURING:
Range: Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 100 ft. (0.63 to 30.48 M).
Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.100 to 6.0 in (2.54 to 152.4mm). Range will vary +/- depending on the coating.
Resolution: +/- .001 inches (0.01mm).
Velocity Range: 0.0122 to 0.7300 inches/μs 309.88 to 18542 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
TRANSDUCER:
Transducer Types: Dual Element (1 to 10MHz).
Locking quick disconnect LEMO “00” connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications.
MEMORY:
Data Structure: Grid (alpha numeric)
Screen Capture: Bitmap graphic capture for quick documentation (.tif ). OBSTRUCT to indicate inaccessible locations.
Capacity: 4Gb internal memory.
Data Output: USB-C 1.1 PC & OSX connectivity
FEATURES:
Setups: 64 custom user-definable setups; Factory setups can also be edited by the user.
Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
Alarm Mode: Set Hi and Lo tolerances with audible beeper and visual LEDs.
Scan Mode: Takes 250 readings per second and displays the minimum reading found when the transducer is removed.
CERTIFICATION:
Factory calibration traceable to NIST & MILSTD- 45662A.
WARRANTY:
2 year limited
REPLACEMENT:
MX2-DL replaces MVX & CG70ABDL

Include:
(1) MX2-DL (MVX) - Datalogging Corrosion Thickness Gauge
(1) T-102-2700 Probe
(1) Couplant
(1) Manual
(1) Plastic Carrying Case
(1) Certificate of Calibration
(2) AA Batteries
(1) PC Software and Data Transfer Cable included with data logging gauges.