DAKOTA NDT MX1-DL Corrosion Thickness Gauge

Dakota NDT MX1-DL (MMX-7) [Z-160-0005] Datalogging Corrosion Thickness Gauge With  T-102-2700 Probe. The Dakota NDT MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The Dakota NDT MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0005 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.

Specification:
PHYSICAL:
Weight: 13.5 ounces (with batteries).
Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 Dmm).
Operating Temperature: -14˚ to 140˚F (-10˚ to 60˚C).
Keyboard: Membrane switch with twelve tactile keys.
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Display: 1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert).
ULTRASONIC SPECIFICATIONS:
Measurement Modes: Pulse-Echo (flaws, pits). Echo-Echo (thru-paint).
Pulser: 150 volt square wave pulser.
Receiver: Manual or AGC gain control with 50dB range, depending on mode selected.
Timing: Precision TCXO timing with single shot 100MHz 8 bit ultra low power digitizer.
TRANSDUCER:
Transducer Types: Dual Element (1 to 10 MHz).
Locking quick disconnect LEMO “00” connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications
DISPLAY:
Display Views: Large Digits: Standard thickness view; Digit Height: 0.700 in (17.78mm).
B-Scan: Time based cross section view.
Display speed variable (10 to 200 readings per second).
Scan Bar: Speed 10Hz. Viewable in B-Scan and Large Digit views.
Bar Graph: Indicates stability of measurement. Viewable in B-Scan and Large Digit views.
MEASURING:
Range: Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 100 ft. (0.63 to 30.48 M).
Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.100 to 6.0 in (2.54 to 152.4mm). Range will vary +/- depending on the coating.
Resolution: +/- .001 inches (0.01mm).
Velocity Range: 0.0122 to 0.7300 inches/μs 309.88 to 18542 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
POWER SOURCE:
Line power: USB to PC or power outlet.
Batteries: Three AA cells. Alkaline - 35 hrs, Nicad - 10 hrs and NI-MH - 35hrs.
Auto power off if idle 5 minutes.
Battery status icon.
CERTIFICATION: 
Factory calibration traceable to NIST & MILSTD- 45662A.
MEASURING:
Pulse-Echo (P-E): 0.025 to 36.00 in (0.63 to 914.4mm).
Echo-Echo (E-E): 0.100 to 6.00 in base metal, and coating 0.001to 0.075 in (0.0254 to 1.905mm).
Range dependent on material and transducer type.
Units: English & Metric
Resolution: 0.001 inches (0.01mm)
Velocity Range: 0.0120 to .7300 in/μs (305 to 18,542 m/sec)
PRF: 200Hz
Display Update Rate: 10Hz
Gain: 40-52dB range in 3dB steps.
Time Dependent Gain (TDG): Used in both pulse-echo (P-E) and Echo-Echo (E-E) modes depending on transducer and frequency selected.
FEATURES: 
Zero: Manual or auto zero option.
Probe Types: Selectable probe frequency & diameter for improved linearity.
High Speed Scan: Display the lowest reading found during a scan. Scan speed at 100Hz.
Differential Mode: Display the +/- difference from a nominal value entered.
Alarm Mode: High & low alarm limits with audible and visual indicatiors.
VX velocity: Measure in terms of velocity for nodularity testing.

Include:
(1) MX1-DL (MMX-7) - Datalogging Corrosion Thickness Gauge
(1) T-102-2700 Probe
(1) Couplant
(1) Manual
(1) Plastic Carrying Case
(1) Certificate of Calibration
(2) AA Batteries
(1) PC Software and Data Transfer Cable included with data logging gauges.