- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
PHENIX TECHNOLOGIES UD-1 Ultrasonic Corona Detector
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Phenix UD-1 Ultrasonic Detector
The UD-1 is an ultrasonic detector designed for corona effect and arcing detection for predictive mainte nance in electric utilities. Available with a variety of accessories, this instrument is a cost-effective must for any prevention plan.
Detection of Electrical Arcs and Corona Effects
Electrical arcs in the air and corona effects emit sounds and ultrasounds. The role of the UD-1 consists of capturing emitted ultrasounds and translating them to the audible range. The UD-1 accurately pinpoints and identifies corona effects and arcs that may be encountered on any type of high voltage installation simply by scanning around the suspected area. The UD-1 sensor is positio ned in a directional amplifier cone that is integrated in the front of the enclosure. An external parabolic sensor, which enables the user to pinpoint electrical defects from a longer distance, is also available. It easily connects on the side of the UD-1 and is equipped with a laser pointing device which enables pinpointing the ultrasound emission source. The dismountable parabolic sensor and the small dimensions of the UD-1 facilitate its use in the field and allows access to any type of installation.
Advantages
Insulation flaws are an important factor in wear, efficiency loss and lifespan reduction of an electrical network. Nowadays, it is important to be equipped with good tools in order to reduce operational costs and save valuable time. The UD-1 enables making remote acoustic inspections with great accuracy. The equipment is user friendly and does not necessitate any training. One of the advantages of the UD-1 is that it works just as well in noisy environments. The applications of the UD-1 are count- less and make it a global leak detection tool: a must for any prevention and maintenance department.
Dynamic Range 96 dB
Center Frequency 40 kHz
Bandwidth 38 kHz to 48 kHz
Output Frequency for 40 kHz 2.4 kHz
Sampling Frequency 120 kHz
Battery Type Lithium Ion
Battery voltage and current 3.6 V 750 mA
Recharging Voltage 5 V
Autonomy 4.0 hrs
Charge time 2.5 hrs
Power consumption 160 mA
Dia. Leak 0.005” @
5 psi 10 feet
Dia. Leak 0.125 mm @
0.35 Bar 3 meters
Audio output impedance 32 ohm
Audio output level 1 Volt peak-peak
Audio output center frequency 2.4 kHz
Standard Accessories
• UD-1 instrument (Battery included)
• Battery charger
• Transportation hard case
• User Manual
• Calibration Certificate