HORIBA OCMA 550 Oil Content Analyzer

Specification of Oil Content Analyzer - Horiba OCMA550
Air quality brands meter type Horiba OCMA-550 to measure the residual oil on components and concentrations of oil stuck to solids such as soil. Measurements can be easily done simply by injecting samples of water taken into the cells attached and arrangements for equipment. This model has a simple design that allows open / close the door to the cell arrangement with just one hand. It is best to sample measurements are extracted as the evaluation of the remaining oil on the components and measurement of the oil contained in the food.

Measuring principle: the extraction of non-dispersive infrared absorption analysis method Solvent
Measurement range: 0mg / L ~ 200mg / L
Resolution: 0 to 99.9 mg / L; 0.1 mg / L and 100 to 200 mg / L; 1 mg / L
Repetition: 0 to 9.9 mg / L; ± 0.4 mg / L ± 1 digit
10.0 to 99.9 mg / L; ± 2 mg / L ± 1 digit
100 to 200 mg / L; ± 4 mg / L ± 1 digit
* For standard liquid
Methods screen: 3.5 inch, 320 × 240 dots
Backlight LCD color graphics
The calibration method: Choose any optional zero and span calibration
Solvent Extraction: S-316 solvent ※ Do not use solvents other than S-316
The amount of solvent extraction is required: Approx. 6.5ml (Total extration solvent required)
The extraction method: Using solvent extraction and extracted manually outside of the product
Operationg Ambient temperature: 0 to 40 ℃ (non-condensing)
Source Power: AC 100V to 240V ± 10%, 50/60 Hz
Power consumption: AC 100V to 240V: Approx.60VA
External dimensions: 195 (H) x 253 (W) x 293 (D) mm
Mass: Approx. 5 kg
External Output: Output to a USB memory stick