- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
BROOKHUIS FMW-B Handheld Wood Moisture Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Contact free moisture meter
FMW type microprocessor-controlled moisture meter suitable for measuring wood and building materials.
The FMW-B measures the moisture content immediately when the back side of the instrument is held against the material to be measured.
Because the specific density of the wood can be entered in the FMW-B all wood species can be measured extremely accurately. The FMW-B can be set for wood ranging between 250 and 1100 kg/m³.
The FMW-B is also suitable for measuring the moisture content in construction materials.
The innovative sensor of the FMW-B enables it to measure even through lacquer and foil. The FMW-B is especially suitable for completed products as door cases, doors, furniture etc.
The FMW measures the wood just by touching it, and due to the high-frequency measuring technology, it will take measurements without damaging paint layers or building plastic. This makes the FMW moisture meter ideal for final and rapid inspections!
Specification:
Capacitive moisture measurement
Measuring range 2~30% (for wood)
Measuring accuracy 0.5% (on reference material)
Resolution 0.1%
Measuring depth 30 mm (1 1/4 inch)
Memory function for 50 readings
Memory function for peak reading (highest reading)
Wood temperature 0~50°C (32~122°F
Instrument temperature range 0~50ºC (32~122°F)
Battery check, 9 volt alkaline battery (6LR6)
Dimensions 160 x 85 x 30 mm
Weight 260 gram (including battery)
Settings can be locked using a pin code