- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
WIKA CPH6000 Digital Process Calibrator
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The WIKA CPH6000 process calibrator is a versatile, multifunction instrument excelling at pressure measurement and calibration as well as pressure switch testing. For a solution that always matches the application, there is a wide range of pressure sensors from which to choose, with accuracies of up to 0.025 % and measuring ranges up to 6,000 bar. These sensors can be interchanged quickly and without tools. In addition to being fixed to the instrument, the pressure sensor can, optionally, be used externally via a connecting cable. If the pressure sensor on the instrument is changed, then the CPH6000 will recognize the new measuring range and thus saves the operator from having to configure it via the menu.
The WIKA CPH6000 process calibrator is a versatile, multifunction instrument excelling at pressure measurement and calibration as well as pressure switch testing. For a solution that always matches the application, there is a wide range of pressure sensors from which to choose, with accuracies of up to 0.025 % and measuring ranges up to 6,000 bar. These sensors can be interchanged quickly and without tools. In addition to being fixed to the instrument, the pressure sensor can, optionally, be used externally via a connecting cable. If the pressure sensor on the instrument is changed, then the CPH6000 will recognize the new measuring range and thus saves the operator from having to configure it via the menu.
Features:
Digital instrument with easily interchangeable reference pressure sensors (sensor can also be attached externally)
Measuring ranges from 0 to 250 mbar to 0 to 6000 bar
Accuracy: 0.025 % (incl. calibration certificate)
Calibration and pressure-switch test functions
PC software and complete service cases (incl. pumps) available
What's In The Box:
(1) Battery charger
(1) Test-cable set with various connectors
(1) 3.1 calibration certificate per DIN EN 10204