PCE TG50 Ultrasonic Thickness Gauge

Rp. 32,500,000

NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

PCE-TG 50 is a compact ultrasonic thickness tester or gauge used to measure the thickness of metal, glass, plastic and other homogeneous materials. This portable handheld material thickness gauge operates with an external ultrasonic contact transducer sensor probe and requires the use of coupling gel or paste. The probe directs ultrasonic waves through the coupling gel into the material to be tested. Since different materials conduct ultrasound at different speeds or velocities, the PCE-TG 50 material thickness gauge allows for ultrasound velocity adjustments to accommodate a wide variety of material testing applications.

With the PCE-TG 50 ultrasonic material thickness gauge, you can determine the thickness of metal, glass, plastic and other homogeneous materials in seconds. Operation of the ultrasonic material thickness gauge is easily carried out via the seven-button interface. Using the integrated calibration block, the measuring device can be calibrated onsite or in the field with minimal effort. Measured values can be transferred to a PC using the optional software and connection cable (sold separately - see accessories for details). The software also offers the possibility to export the data into Microsoft Excel.

Features:

- Measurement range: 1.2 ... 200.0 mm / 0.05 ... 7.87 in (steel)

- Accuracy: ± 0.5% v. Mw. ± 0.1 mm / ± 0.00393701 in

- Resolution: 0.1 mm / 0.001 in

- Ultrasound velocity (adjustable): 800 ... 9950 m/s / 2624.67 ... 32644.36 ft/s

- Adjustable ultrasound velocity (for thickness measurements of different materials)

- Requires use of contact gel or paste

- Features an integrated steel calibration block and user-friendly DIY calibration procedure

- Optional software and connection cable (sold separately) for data transfer to a PC - see accessories for details

- Incl. calibration certificate

Specification:

Measurement range 1.2 ... 200 mm / 0.05 ... 7.87 in (steel)

Accuracy ± 0.5% v. Mw. ± 0.1 mm / ± 0.00393701 in

Transducer 5 MHz frequency, 8 mm / 0.32 inch diameter; Probe support surface: 10.2 mm / 0.4 in diameter; Head: 15.4 mm diameter / 0.61 in

Resolution 0.1 mm / 0.001 in

Ultrasound velocity 800 ... 9950 m/s / 2624.67 ... 32644.36 ft/s (adjustable)

Display 4-digit LCD

Operating conditions -10 ... 50°C / 14 ... 122°F; Relative humidity: < 80% RH

Calibration block 5.0 mm / 0.2 in steel (integrated)

Measuring units mm or in (adjustable)

Material temperature 0 ... 50°C / 32 ... 122°F (permanent); 50 ... 85°C / 122 ... 185°F (for 5 minutes, then 30 minutes cooling below 50° C / 122°F)

Data interface RS-232 port

Power supply 3 x 1.5V AAA batteries (approx. 250 hours of battery life)

Dimensions Approx. 142 x 77 x 40 mm / 5.6 x 3.1 x 1.6 inches (handset)

Weight Approx. 265 g / < 1 lb (handset with batteries and probe)

Complette Package:

1 x PCE-TG 50 ultrasonic thickness tester

1 x Ultrasonic contact transducer sensor probe

1 x Container of coupling gel

3 x 1.5V AAA batteries

1 x User manual

1 x Calibration certificate

1 x Carrying case