- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
PIECAL 334 Plus Milliamp Loop Calibrator
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Features:
Calibrate Milliamp Instruments
Source: 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA
Read: 0.000 to 52.000 mA, -99.99 to 99.99 V
Simulate: 2-Wire Transmitters, Power & Read 2-Wire Transmitters
Selectable: 250 W resistor for HART compatibility
Calibrate with confidence
Accurate to ±0.025% of Span at 4.000 & 20.000 EZ-CHECK outputs
Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
Locate Loop Current Leakages
Measures ground current leakage from faulty wiring, flooded conduit and corrosion bridges.
Automatic indication of Loop Current and Leakage Current.
Faster Calibrations
Instantly select three outputs with EZ-CHECK switch Easily find trip points with two speed
EZ-DIAL plus Automatic Stepping & Ramping
The Piecal 334Plus 4-20mA Loop Calibrator with Current Leakage Detector, Automatic Stepping & Ramping, and Built-in 250 Ohm HART Resistor builds on the Pie 334 with advanced features unique to PIE calibrators. Easily find current leaks to ground, deteriorating & damp insulation or corroded terminals with patented loop diagnostic technology. Automated stepping (2, 3 or 5 steps) and ramping lets you set the 334 Plus at one instrument and check any other point in the loop.
Get better calibrations with a five digit display to 20.000 mA. You can read the display in dim conditions with the built-in backlight. Additional improvements over 334 from other manufacturers include better long term stability, accuracy, reliability & ruggedness plus improved battery life.
PLUS the PIE 334-Plus exceeds the performance of many higher cost calibrators to meet today's most demanding requirements while maintaining the familiar, time proven reliability and ease of use of similar calibrators. The PIECAL 334Plus is the new milliamp calibrator standard.
Includes:
Test Leads
NIST Calibration
Rubber Boot