- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
METREL MI3242 (2A) Low Micro-Ohm Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Metrel's MI 3242 is a truly handheld solution for measuring low resistance levels on switches, relays, busbars, power distribution cable joints, motor and generator winding, power transformers, power inductors, rail track joints, wires/cables and for a wide variety of other industrial applications.
Unlike many other ohmmeters on the market, the MI 3242 stands out thanks to its portable, handheld design. No more lugging around big, heavy cases - the MI 3242 includes all of the functionality you need in a lightweight, portable instrument that's comfortable to hold even in one hand.
The MI 3242 ohmmeter measure bidirectional resistance from 1μΩ to 199.9Ω with test current of up to 10A. It comes as standard with pre-programmed limits for PASS/FAIL evaluation during measurement, complete with green/red indicators on either side of the instrument.
This ohmmeter is also a downloadable unit - it can store up to 1500 records with timestamps in its internal memory and these results can be downloaded into Metrel's PC SW HVLink PRO software package for review, analysis and printing.
Features:
Measure low resistance levels in a wide variety of applications
Portable, handheld and lightweight design
Measurement range from 1μΩ to 199.9Ω
Test current of up to 2A
Manual Mode - checks continuity of C1 and C2 connectors, with current applied in forward and reverse directions
Automatic Mode - test starts automatically when probes are connected, with current applied in forward and reverse directions
Continuous Mode - allows repeated measurements to be made on the same sample
Inductive Mode - used for measuring resistance of inductive loads like motors and generators
High overvoltage protection (CAT III 600V) allows measurements in substations and other points with low line resistance
Internal protection circuit protects the user and instrument from accidental connection to line
50/60Hz ripple detection and rejection
Powered by rechargeable batteries - up to 800 measurements per charge
Pre-programmed test limits with PASS/FAIL evaluation on screen and using green/red LED indicators
Large 128 x 64 dot matrix display with backlight
Store up to 1500 records, with time stamps, in internal memory
Analyse your findings using Metrel's software package
What's In The Box:
(1) Metrel MI 3242 Low Resistance Ohmmeter
(1) 2.5m Test Cable (4 Wire)
(4) Croc Clips (2 x Red, 2 x Black)
(2) Test Probes (Black)
(1) Power Supply Adapter
(6) 1.2V NiMH Rechargeable Batteries
(1) RS232 Serial Cable
(1) USB Cable
(1) Soft Carrying Bag
(1) PC SW HVLink PRO Software
(1) Instruction Manual
(1) Calibration Certificate