YOKOGAWA CA450 Process Multimeter

The Yokogawa CA450 process multimeter is an on-site measuring instrument that combines the functionality of a digital multimeter for basic measurements such as voltage, current, and resistance, with a 4-20mA loop calibrator for electrical and process measurements. With specialized functions for repair, maintenance, and troubleshooting of plant equipment, the Yokogawa CA450 is a single-unit, on-site measuring solution that reduces the engineering load and improves plant efficiency by accomplishing tasks that have traditionally required two on-site measuring instruments.

The CA450 is a true RMS digital multimeter with a basic accuracy of 0.05% and dedicated sensor modes for direct inputs from sensors such as AC/DC clamp probes. In addition, the meter incorporates a number of process-related features including loop check and 4-20 mA output generation and measurement functions.

With the loop check function, designed for tests on 2-wire transmitters, the CA450 supplies 24 VDC power to the transmitter and measures the DC output in milliamperes to an accuracy of 0.05% up to 30 mA. A HART mode with loop power and 250 ohm resistance allows HART and BRAIN communications to be tested. A transmitter simulator function allows transmitter I/O to be checked by drawing in ('sinking') designated currents from the external voltage generators of the instrumentation. The 4-20 mA generator output includes span, step, auto-step and sweep capabilities.

The CA450 can also be used to carry out operating checks and adjustments on valve positioners, including zero span adjustment, response testing using the auto-step function, and tests for hunting, sticking/slipping and valve open/close errors. Controller programs can also be verified using the CA450's 4-20 mA step generation function, which switches between 4 and 20 mA in 4mA output steps.

Electrical measurements include power supply peak-to-peak measurement with instantaneous detection in the DC voltage measurement mode, and AC/DC current measurement up to 180 A AC and 3000 A AC in sensor mode. The CA450 can also be used to check panel meters for correct connection, reproducibility and errors. The CA450 features a safe design with current terminal shutters to protect both the operator and the instrument against incorrect connection. It conforms to the 600 V CAT. IV and 1000 V CAT. III standards. An optional adapter allows the instrument to be linked with a PC, with data transferred via an infrared USB interface.

Features:
Simultaneous 24 V loop power and mA measurement
HART mode setting with loop power (250 OHM resistance)
SIMULATE (SINK) function simulates transmitters
4-20 mA span/step/auto-step/sweep output
High accuracy signal measurement: DC mA 0.05%/30.000 mA
Handheld DMM function
Peak/Hold function for DCS power peak-to-peak measurement
Dedicated sensor modes for direct reading of many sensor signal types
Current terminal shutter prevents incorrect connections
Sensor function handles AC load current measurement
Meets 600 V CAT. IV, 1000 V CAT. III safety standards

What's In The Box:
(1) Meter
(4) AA Batteries
(1) Test Lead 98015
(1) Lead Cable 98064
(1) Fuse 99042
(1) English Instruction Manual