KYORITSU KEW 6315-03 (1000A) Power Quality Analyzer

The power analyser Kyoritsu 6315 is used for the analysis of performance and harmonics. The power analyser can safely measure currents of up to 3000 A. Besides the performance analysis, the power analyser can execute a complete network analysis. The power analyser also measures the phase angle, harmonics, apparent power, active power and work. All measurable variables are shown on the colour display of the power analyser 6315. The power analyser’s built-in memory has a size of 3 MB therefore is sufficient for a data record of about 2 days. The memory of the power analyser can be extended by an additional CF card. The Maximum memory capacity is 2 GB. The power analyser is the large version of harmonics-analyser Kyoritsu 6300. If you have any questions concerning the power analyser, please take a look at the following technical data. Our technicians and engineers will gladly advise you on the power analyser or any other of PCE  products in the fields of regulation and control, or scales and balances of PCE Instruments.

- Harmonic Analysis
- Measurement of voltage and current
- Up to 3000 A
- Long recording duration > 1 year
- Frequency measurement up to 40 ... 70 Hz
- Memory of up to 2 GB
- USB and Bluetooth interface

Technical Specification  Power Analyser Kyoritsu 6315
Voltage measurement
Range    150 V / 300 V / 600 V / 1000 V
Display    4 digits
Accuracy (45 ... 65 Hz)    ± 0.3 % rdg ± 0.2 % f.s.
Overload protection    1200 V
Current measurement
Range converter Flex 3000A    300 A / 1000 A / 3000 A
Display    4 digits
Accuracy (45 ... 65 Hz)    ± 0.3% rdg ± 0.2% f.s.
plus measurement uncertainty of the current transformer
Active Power
Range    Range voltage x current range
Display    4 digits
Accuracy (45 ... 65 Hz sine wave)    ± 0.5% rdg ± 0.2% f.s.
plus measurement uncertainty of the current transformer
Frequency
Range    40 ... 70 Hz
Display    4 digits
Accuracy    ± 0.5% f.s.
General technical specification for Power Analyser
Display    320 x 240 (RGB) pixels, 3.5-inch colour display
Memory interval (adjustable)    1/2/5/10/15/20/30 seconds
1/2/5/10/15/20/30/60 minutes
Viewing Time    1 second
Interface    USB and Bluetooth
Memory    3 MB (internal, enough for about 2 days at 30 min)
up to 2 GB (expandable via CF card)
Security    CAT III / 600 V
Standardization    IEC / EN 61010-1
IEC / EN 61010-031
Power supply    100 ... 240 V AC 50/60 Hz
6 x 1.5V AA battery
Standby battery operation    about 7 hours
Operating conditions    0 ... 50 ° C / 85% RH non-condensing
Storage Conditions    -20 ... +60 ° C / 85% RH non-condensing
Dimensions    175 x 120 x 65 mm
Weight    about 800 g with battery

Delivery content of the Power Analyser Kyoritsu 6315
1  power analyser Kyoritsu 6315 / 3000 A with a flex converter set x 3000 A
1 x voltage test lead set (red / green / black / blue)
1 x alligator clip set
1 x power cable
6 x AA batteries 1.5 V
1 x CD-ROM (software KEW PQA MASTER, instructions)
1 x USB cable
1 x Soft Case
1 x Quick Start Guide
32 x cable markers