- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
EAGLE EYE LB24/48-300/600 Constant Current DC Load Bank
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Eagle Eye Constant Current DC Load Banks are designed for discharge testing, battery capacity testing, acceptance testing, battery maintenance, and other testing of DC systems. The LB-24/48-300/600-CC load banks are portable, economic load banks with reliability and ease of use in mind. The intelligent technology allows a constant current discharge without the need for any adjustments during the test. The LB24/48300/600CC is used in a variety of industries including utilities, telecommunications, UPS, motive power / forklifts, transportation, CATV, and many more.
Eagle Eye's Constant Current DC Load Banks are user-friendly and cost-effective for continuous DC load testing. Easily begin the test by programming the load test parameters with the keypad. The LB-24/48-300/600-CC Constant Current Load Banks have an LED display for voltage, current and test duration. The LB24/48300/600CC model will automatically adjust the current during the discharge test. Previously used parameters are automatically saved after powering off the machine. The load banks have three settings to auto-stop the discharge: Test Time, End Voltage and Exceed Capacity. In addition, an alarm will sound and end the discharge in the event of overheating, an abnormal disconnection of the battery, or if improper polarity is detected. The equipped cooling fans continue to run automatically after each discharge test to ensure maximum heat protection and prevent overheating. The LB-24/48-300/600-CC has a voltage of 24 to 48 volts, and an amperage of 300 to 600 amps.
Features:
Current: 300/450/600 A
Voltage: 24/36/48 V
Discharge Current Accuracy: 0.1 A
Voltage Accuracy: 0.1 V
Control Precision: ± 0.3% / +0.2 A
LED display for voltage, current, and test duration
Easily program test parameters with simple keypad
Three test conditions for discharge auto-stop: Test Time, End Voltage, Exceeded Capacity
Unit will alarm and end discharge in the event of overheating, abnormal disconnection of battery, improper
polarity detected
Cooling fans continue to run automatically after each test to ensure maximum heat protection.
Previously used parameters saved after powering off the machine
What's In The Box:
(1) LB-Series CC Load Bank
(1) 3 m (10 ft) Discharge Cables
(1) 110/220 AC Power Cable
(1) User Manual
(1) 1-year Standard Warranty