- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHECKLINE AD100 For Rubber, Plastic and Elastometer Durometer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Available Scales: A, B, C, D, DO, O, OO & Asker C
Conforms to: ASTM D-2240, DIN 53505, ISO 868, JIS K 7215 & ISO 7619. Asker C model conforms to JIS K-7312.
The Check-Line AD-100 durometer tester is the genesis of years of experience offering high quality Durometers to discriminating users. Featuring an 18mm footer that offers high stability and conforms to all international standards, the AD-100 is the ideal durometer for a wide range of shore hardness measuring applications.
Seven models are available each calibrated for a different Shore scale including; Shore A, Shore B, Shore C, Shore D, Shore DO, Shore O, Shore OO and Asker C.
The AD-100 displays hardness readings on an easy-to-read analog scale calibrated in 0 to 100 Shore units. An optional MEMORY POINTER holds reading until manually reset, allowing operator to concentrate on measurement task. Also valuable if used in a position where dial is obstructed.
Note: Optional Memory Pointer is unable to be used with Type OO durometers.
All AD-100 models are supplied in a foam-fitted protective carrying case along with reference test block and NIST traceable calibration certificate.
Features:
Includes NIST-Traceable Calibration Certificate
Conforms to ASTM D-2240, DIN 53505, ISO 868, JIS K 7215 and ISO 7619. Asker C model conforms to JIS K-7312.
Supplied with reference test block
18 mm diameter footer provides stable basis for testing and conforms to all International Standards
1-Year Warranty
Can be used in any measurement orientation as gravity does not affect readings
Aplication
AD-100-A Type A Durometer for Soft Rubber, Plastics and Elastomers
AD-100-B Type B Durometer for Harder Elastomers and Plastics. Use above 93 A scale.
AD-100-C Type C Durometer for Medium Hard Elastomers and Plastics
AD-100-D Type D Durometer for Hard Rubber and Plastics
AD-100-DO Type DO Durometer for Dense Granular Material and Textile Windings
AD-100-O Type O Durometer for Soft Elastomers Below 20 A Scale
AD-100-OO Type OO Durometer for Light Foams, Sponge Rubber Gels and Animal Tissue
What's in the Box:
(1) Durometer
(1) Instruction manual
(1) Calibration certificate
(1) Metal carrying case.