- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
AEMC CA1725 (1748.10) Contact/ Non-Contact Tachometer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Features:
Measurements up to 100,000 rpm
Multiple of functions and automatic routines for data acquisition and storage: measurement of rotational speed, linear speed, count, frequency and period
Extensive programming possibilities
Digital display with analog bargraph
Includes TachoGraph software on CD-Rom
Stores up to 4000 measurements results
The AEMC CA1725 handheld instrument measures up to 100,000 RPM using infrared measurement. A combination digital/analog bar graph LCD displays the measurement clearly and accurately. Other features include auto or manual range selection, smoothing, min/max recording and hold functions. Count, alarm and print functions are also provided. An accessory kit of three mechanical adapters for the AEMC CA-1725 allows for direct connection and measurement to rotating shafts and other devices.
Hi and Lo alarm levels are programmable as well as display multiplier coefficient "K" (scale factor). RS-232 communication is standard for printer or computer interfacing. The CA27 is supplied in a carrying case with 15 reflector strips, 9V Alkaline battery and a user manual.
Includes:
Instruction Manual
Hard Case
FRB F Connector
9V Battery
Reflective Strips
TachoGraph Software
Quick Startup Guide