CHECKLINE TI007X Precission Ultrasonic Thickness Gauge

Rp. 60,000,000

NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

The TI-007X is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

The TI-007X has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).

Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode.

The TI-007X can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the TI-007X does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required.

Features:

Includes NIST Traceable Calibration Certificate

Resolution of 0.0001 inch (0.001 mm)

Large, backlit LCD display retains last reading

Selectable units of inch or mm

Selectable Backlight ON/OFF/AUTO

Optional serial RS-232 or Bluetooth output

IP 65 Rated for protection even in the toughest field conditions

Operates on two (2) AA Batteries - 45 hours continuous operation

Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)

Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits)

and Velocity Mode

LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode,

Zero and units

Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the

"scan" will be displayed

Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity

USB Data output of single values for transfer to data collection devices (no internal memory)

Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications

Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)

5 Year Warranty, CE-Certified and Made in USA

What's In The Box:

(1) Main unit

(1) T-402-5507 probe

(1) USB-C Data transfer cable

(1) 4 oz. bottle of coupling fluid

(2) AA batteries

(1) NIST-Traceable Calibration Certificate

(1) Operating Instruction Manual

(1) Carrying case