- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
BK Precision 310 Digital Milli-Ohmmeter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The model 310 Digital Milli-Ohm Meter is used to ensure continuity and integrity of a wire, cable, conduit or any electrical connection. The 310 has a display resolution of 100 micro-ohms and has a professional four wire Kelvin test lead set included to ensure accurate readings. The heavy duty case has a rubber seal to make the unit water resistant and a convenient shoulder strap.
Features:
Over-voltage and over-temperature protection
5 ranges with 100µ ohm max resolution
Water resistant case with shoulder strap
Four wire Kelvin lead measurements
Auto Power Off
IEC/ EN 61010-1 / CE
Included: 4-Wire Kelvin Leads, Carrying Case with Shoulder Strap and Batteries
Specifications:
Measuring Ranges: 0 - 200.0m© in steps of 100µ © ; 0 - 2000m© in steps of 1m© ; 0 - 20.00© in steps of 10m© ; 0 - 200.0© in steps of 100m© ; 0 - 2000© in steps of 1©
Accuracy: ± 0.5% of reading ± 2 digits over the operating temperature range, -15° C to + 55° C, with the supplied test leads
Test Current: 1mA = > 2000 © range; 10mA = > 200 / 20 © ranges; 100mA = > 2000m / 200m © ranges
Test Current Accuracy: ± 0.1%
Protection Fuses: Mains = 0.5A, HBC, 5 × 20mm, DIN; Current = 1A, HBC, 5 × 20mm, DIN; Voltage = 0.5A, HBC, 5 × 20 mm, DIN; Maximum Output Voltage ( C1-C2) 20V
Dimensions: 250 ( L) × 190 ( W) × 110 ( D) mm
Weight: 1500g ( approximate)
Accessories Included: Test Leads, Instruction manual, Shoulder belt, 1.5V ( AA) × 8 Batteries

