AEMC 5060 (2130.21) 5KV Megohmmeter/ Insulation Tester

Features:
True Megohmmeter
Test voltage combination of 500V, 1000V, 2500V and 5000V
Insulation measurements from 1kW to 10TW
Adjustable and programmable test voltage (50 to 5000V)
Automatic calculation of DAR, PI and DD values
Direct measurement and display of Capacitance and Leakage Current
Display resistance, test voltage and run time
Programmable test run times and PI ratio times
Smooth and Alarm functions
Automatic test inhibition if live sample (>25)
Automatic discharge and display of discharge voltage
Large dual-display with time, voltage and measurements shown
Rugged dual wall weatherproof field case
RS-232 interface for direct printing of results
128kB memory for storing field test data
Remote operation from PC
Includes DataView software
Designed and built to IEC safety standards
EN 61010-1, 600V, Cat. III

Applications:
Test insulation on cables, transformers, motors, generators, insulators and wiring installation
High resistance or absorption tests
Spot reading tests
Timed resistance measurements
Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
Multi-layer insulation testing
Low insulation test range for testing old or flooded installations
Motor insulation resistance measurements
Computer controlled production line testing
Predictive maintenance by storing results in PC for trend analysis
User selectable voltage testing to provide application specific testing
Dielectric discharge testing to detect bad layers in multi-layer insulation testing

The Digital/Analog Megohmmeter Model 5060 is the latest design in 5000V insulation testers. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD). The Model 5060 displays the test voltage, insulation resistance ad the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads is displayed at the conclusion of the test. This meter is designed with the highest level of built in safety features. The Model 5060 can be operated from an internal rechargeable battery system or from an AC line power. The Model 5060 offers additional functionality in that an RS-232 port provides the ability to configure the unit from a PC and run the test from the PC. Test reports can be generated directly from the instruments to a printer or through the PC using the DataView graphing and analysis software (which is provided).

Includes:
Integral Hippo Clips
Rechargeable Battery
Jumper Lead
6ft RS-232 DB9/DB25 F/F to DB9/DB25 F/F Cable
DataView Lite Software
Soft Accessory Bag
Instruction Manual

Specifications:
Measurement Range
Test Voltage/Range:  500V 20kW to 2000GW / 1000V 40kW to 4000GW / 2500V 100kW to 10,000GW (10TW) / 5000V 200kW to 10,000GW (10TW)
Automatic Voltage: Programmable: 50 to 1000V: 10V increments / 1000 to 5000V: 100V increments
Short Circuit Current: <3mADC
Accuracy: 1kW to 40GΩ ±5% of Reading ± 3cts / 40GΩ to 10TΩ ±15% of Reading ± 10cts
DAR (1 min/30 sec): 0.000 to 9.999
PI (10 min/1 min & user programmable): 0.000 to 9.999
DD (Current after 1 min ÷ (test voltage x capacitance):  0.01 to 9.999
Capacitance Check:  0.005 to 4.999µF
Leakage Current Measurement:  0.250nA to 3mA
Programmable Run Time R(t): 1 to 60 minutes
Smooth Function (user selectable):  Digital filtering stabilized display readings
Discharge After Test:  Automatic
Discharge Voltage Display: Yes
Voltage Test/Safety Check :  0 to 1000VAC/DC (16 to 420Hz), 1V Resolution
Voltage Warning Indicator:  Yes >25V
Test Inhibition:  Yes >25V
Guard Terminal: Yes