- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHAUVIN ARNOUX CA6464 Earth and Resistivity Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Chauvin Arnoux CA6462 Digital Earth Tester is able to measure earth resistance, resistivity and coupling, meaning it effectively does the jobs of three different pieces of equipment. The earth tester is capable of measuring up to 1999 Ohms of ground resistance, up to one ohm of resolution and test currents of up to 10mA, and has seven different measurement ranges to ensure that results are as accurate as possible. All results are accurate to two percent.
The Chauvin Arnoux CA6462 Digital Earth Tester is equipped with four colour-coded terminals in green, black, blue and red, meaning you can identify the different terminals at a glance. Additionally, the digital earth tester has a captive bar, which allows you to change the device from a four-wire tester to a three-wire tester very quickly.
The results captured by the meter are displayed on the LCD screen, which is equipped with a backlight for ease of reading. Other user-friendly features include an easily accessible fuse holder, and flashing light signals to indicate potential problems.
The body of the device weighs 2.8 kilograms, and measures 273 x 247 x 127 millimetres. Unlike the CA6460, this meter is equipped with a NiMh rechargeable battery, which can last almost five hours on a single charge. Also included is the required cable which allows the meter to be plugged in to a mains power supply. The Chauvin Arnoux CA6462 Earth Tester can be purchased with an optional 100m Earth and Resistivity Kit.
Chauvin Arnoux CA6462 Earth Tester Key Features
3-in-1 Tester: Resistivity, Earth, Coupling
Measurement Range: 0.00 to 2,000W (3 Automatic Ranges)
Change From 4-wire Method to 3-wire Method Thanks to 1 Removable Captive Bar Between E and ES
3 Fault Presence Indicators to Validate Measurement
Measurement Frequency: 128Hz
Easy Connection of Rods Through Colour-Coded Terminals
Large Backlit Digital Display with 2,000 Counts
Power Supply: NiMH Rechargeable Battery for an Average Battery Life, Constantly Controlled, of 1,180 Measurements of 15s Each
IP53 Leakproof Case with Folding Cover and Carrying Handle
Electrical Safety: IEC 61010 and IEC 61557
Dimensions: 273 x 247 x 127 mm - Weight: 3.3 kg
Can be purchased with an optional 100m Earth and Resistivity Kit
What's Included?
Chauvin Arnoux CA6462 Earth Tester
Mains Cable
Optional 100m Earth & Resistivity Kit