- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHAUVIN ARNOUX CA6630 Battery Capacity Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Chauvin Arnoux CA 6630 [P01191303] 4 V to 40 V Battery Capacity Tester. The Chauvin Arnoux CA6630 Battery Capacity Tester is perfect for performing preventative maintenance and therefore avoiding costly breakdowns on battery-powered devices. The tester is suitable for use on nickel/cadmium, lithium-ion, and nickel/hybrid metal batteries and gives a simple PASS/WARNING/FAIL indication of battery status. Results are gained by measuring internal resistance up to 40Ω and open-circuit voltage up to 40V and then comparing the readings with the theoretical results saved in the instrument. Accuracy is aided by the four-wire resistance measurement method and a zero function which compensates for voltage circuit.
Readings and a status indication are displayed on the Chauvin Arnoux CA6630’s backlit digital display and up to 999 readings can be saved to the tester’s internal memory and then recalled at the user’s discretion. Data transfer software and a connection cable are supplied as standard in order to allow easy downloading of results to the user’s PC. In datalogging mode, readings can be automatically taken at an adjustable rate and the operation is undertaken via a simple push-button interface. The Chauvin Arnoux CA6630 is powered by six 1.5V batteries which allow 7 hours’ continuous operating time. Test leads and a hard carry case are supplied as standard and the tester has a manufacturer’s warranty of 12 months.
Part Number: P01191303
Resistance: 40 mΩ to 40 Ω
Voltage: 4 V to 40 V
Suitable for: nickel/cadmium, lithium-ion, nickel/hybrid batteries
Internal resistance range: 0 to 40Ω
Open-circuit voltage range: 0 to 40V
PASS/WARNING/FAIL indication
Zero-function for voltage circuit compensation
Manual and datalogging modes
Internal memory for 999 readings
Data transfer software and cable included as standard
7-hour battery life
12-month warranty
Include:
(1) CA6630 - Battery Tester
(1) Set of 2 x 1-m long measurement leads with retractable test probe tips
(1) Data transfer software for exporting and processing stored data on a PC
(1) C.A 6630 / PC connection cord
(1) Instruction manual in 5 languages
(1) Hard carry case