- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
SPS Electronic S 1801M Hipot Safety Analyser
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The S 1801M hipot safety analyser combines high-voltage testing (AC and DC) as well as ground bond and insulation testing in a single device. The S 1801M is ideal for fast, cost-effective and convenient safety testing in accordance with current national and international standards (IEC, EN, UL, VDE etc.).
The S 1801M offers maximum convenience and ease of use thanks to the integrated 4.3" TFT color display. Thanks to the individually configurable test programs, a fully automatic test plan can also be created for each product. The DUT only needs to be connected once - time-consuming reconnection is a thing of the past!
With a short-circuit current of 3 mA AC / 10 mA DC, the S 1801M table-top test device is safety current-limited (in accordance with EN 50191) and makes it easier to set up a safe workplace. This allows it to be used by non-qualified electricians. The S 1801M also has a fully electronic high-voltage generator, which ensures accurate and fast testing.
Hipot safety analyser S 1801M
S 1801M
Plug-in 14" / 3 HU
High voltage test AC: 100 - 5,500 V / 0 - 3 mA
High voltage test DC: 100 - 6,000 V / 0 - 10 mA
Insulation measurement DC: 100 - 6,000 V / 250 kΩ - 1 GΩ
Ground bond test AC: 10 - 30 A / 0 - 400 mΩ
Wide-range power supply unit: 90 to 253 V, 50 Hz / 60 Hz