- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
GF Signet 2850 Conductivity / Resistivity Sensor
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The GF Signet 2850 conductivity/resistivity sensor electronics are available in various configurations for maximum installation flexibility. The universal mount version of the GF Signet 2850 conductivity/resistivity sensor is for pipe, wall, or tank mounting and enables single or dual (digital versions only) inputs using any standard GF Signet conductivity/resistivity sensor. The threaded j-box version can be used with these same Signet sensors for submersible sensor mounting. The GF Signet 2850 conductivity/resistivity sensor is also available as a combined integral system configuration for in-line mounting and includes a conductivity electrode in a choice of 0.01, 0.1, 1.0, or 10.0 cm-1 cell constants.
GF Signet 2850 conductivity/resistivity sensors are available with a choice of two outputs, digital or 4 to 20 mA. The digital (S3L) output version of the GF Signet 2850 conductivity/resistivity sensor allows for up to six sensor inputs directly into the Signet 8900 Multi-Parameter Controller. The two-wire 4 to 20mA output is available with eight 4 to 20 mA output ranges for each electrode cell constant. Additionally, each range can be inverted and is field selectable by the user.
The GF Signet 2850 conductivity/resistivity sensor is built with NEMA 4X/IP 65 enclosures, which allow wiring connections with long cable runs of up to 1,000 feet (305 m). EasyCal is a standard feature of the GF Signet 2850 conductivity/resistivity sensor that automatically recognizes conductivity test solution values for simple field calibration. A calibration tool is available for validation of the sensor electronics according to USP requirements.
Applications for the GF Signet 2850 Conductivity/Resistivity Sensor
Water treatment & water quality monitoring
Scrubber, cooling tower and boiler protection
Deionization
Demineralization, regeneration & rinse
Reverse osmosis
Aquatic animal life support systems
Features
Integral mount systems for quick and easy installation
Compact design for maximum installation flexibility
Digital interface or two-wire 4 to 20 mA output
EasyCal with automatic test solution recognition
Dual channel unit available for low cost installation with Signet 8900 Multi-Parameter Controller
For use with ALL Signet conductivity electrodes