JFE ADVANTECH SONOHARD SH-22A Ultrasonic Hardness Tester

Ultrasonic Hardness Tester (SONOHARDTM) model SH-22A completely differs from conventional testers which measure sizes of indentations on test samples using microscopes. SH-22A applies a diamond indenter equipped on a vibrating rod that presses on a test surface at a fixed force and then measures the hardness by fluctuation of ultrasonic vibration.

Features
– Probe tip diameter 8mm enables narrow and curved measurements.
– High durability – more than one million measurements
– Measurement in just 2 seconds
– Static loading method with Vickers indenter
– Tiny indentation (approx.0.1mm)
– Measurement is not affected by material / mass of measuring base
– Measurement can be done in all directions
– Upper / Lower limit alarm setting available

JFE Advantech SONOHARD™ SH-22 Ultrasonic Hardness Tester Perfect for testing hardness on narrow/curved surfaces with a small diameter probe. SONOHARD™ Rugged and Portable Hardness Tester.
– 8mm probe diameter allows for narrow and curved measurements.
– High durability – more than one million measurements
– Static loading method with Vickers measuring head
– Small concavity (about 0.1mm)
– Measurement is not affected by the material/mass of the measuring base
– Can measure in all directions 8. Upper/lower limit alarm setting available

Supplied as a complete kit including: 1 Display unit, 1 Probe (with grip), 1 Probe cable (1.5m), 1 Hardness standard block: around 55HRC, (For SH-22-S005: around 600HV), 1 AC adapter, 1 Recharger, 1 Lithium ion battery, 1 Carrying case, 1 Instruction manual, 1 test report, 1 guarantee card.