- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
MILWAUKEE MW801 Low Range pH/EC/TDS Combo Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
pH and TDS are critical for water conditioning and aquariums. Total Dissolved Solids in drinking water can affect the clarity and taste of water. In addition, high TDS levels can affect the health of a fish in an aquarium. High concentrations of TDS can decrease the clarity of the water in aquariums and decrease photosynthesis in aquatic plants.
The Milwaukee MW801 PRO Low Range Combo Meter lets you easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe.
Specifications
pH Range: 0.0 to 14.0 pH
EC Range: 0 to 1990 uS/cm
TDS Range: 0 to 1990 ppm
pH Resolution: 0.1 pH
EC Resolution: 10 uS/cm
TDS Resolution: 10 ppm
pH Accuracy: ±0.2
EC/TDS Accuracy: ±2% Full Scale
Calibration Solutions: M10007B (pH 7.01) M10031B (1413 uS/cm) M10080B (800 ppm)
Conversion Factor: 0.5
Calibration: Manual at 1 point pH & EC
Temperature Compensation: Automatic from 32 to 122°F (0 to 50°C)
Probe: SE600 combination pH/EC/TDS probe
Environment: 32 to 122°F / 0 to 50°C; max RH 95%
Battery Type / Battery Life: 1 x 9V alkaline / 150 hours of use
Dimensions Meter: 7.3 x 3.2 x 1.8 inches (185 x 82 x 45 mm)
Weight: 0.36 lbs. (with battery) (0.165 kg)
Dimensions Package: 11 x 4.8 x 4.65 inches (268 x 122 x 118 mm)
Weight Packaged: 1.41 lbs. (0.64 kg)

