- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
HANNA HI99121N Portable Direct Soil pH Meter Kit
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The HI 99121N kit has been designed to address the question of correct and rapid measurement of pH directly in soil. Every item inthis kit has been made to facilitate measurements in the field without compromising accuracy. With HI 99121N you can test the pH of soil directly or after preparation of a diluted sample. In order to measure the pH directly, the kit includes a plastic auger to perforate the ground.
The HI 1292D pH electrode has been designed for direct soil measurement. It has a conic, rugged tip and can be directly inserted inmoist or soft soil. The electrode incorporates a temperature sensor right near the tip to enable it to measure and quicklycompensate for temperature.For higher degrees of accuracy, or for stony ground where the electrode may be damaged, use the specially made HI 7051M soilpreparation solution. This solution is included in the package to help you measure pH more precisely by dilution.
The dual-level LCD shows the pH value from -2 to 16 with 0.01 resolution. It simultaneously displays the temperature on thesecondary level. With a menu-driven custom microprocessor, the user is helped with clear prompts during operation and calibration.
Features:
New Larger LCD
Tutorial messages for calibration and setup
Missing Probe Indicator
New Rugged, thinner ergonomic case
Faster/ Easier battery replacement
Specification:
Range pH -2.00 to 16.00 pH
Temperature -5.0 to 105.0°C / 23.0 to 221.0°F
Resolution pH 0.01 pH
Temperature 0.1°C / 0.1°F
Accuracy @ 20°C pH ±0.02 pH
Temperature ±0.5°C (up to 60°C), ±1°C (outside);
±1.0°F (up to 140°F), ±2°F (outside)
pH Calibration automatic one or two point calibration with two sets of memorized buffers (Standard 4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature Compensation Automatic, -5 to 105°C (23 to 221°F)
pH Electrode HI 1292D glass body, pre-amplified pH electrode for soil measurement with internal temperature sensor, DIN connector and 1 m (3.3’) cable (included)
Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use. auto-off after 8 minutes of non-use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”)
Weight 205g (7.2 oz.)

