- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
HANNA HI9811-5 pH/ EC/ TDS Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
HI 9811-5 is a pH/ EC/ TDS waterproof meter designed for simplicity in taking pH, µ S/ cm, ppm ( mg/ L) and temperature measurements. both the HI 9811-5 and HI 9812-5 are ideal for hydroponics, greenhouses, farming and ground water applications.
Due to the built-in temperature sensor, conductivity readings are automatically compensated for temperature changes. The temperature coefficient is fixed
at 2% / ° C.
The specially engineered HI 1285-5 pH/ EC/ TDS and temperature probe utilizes a fiber junction and gel electrolyte which provide a fast response and reduced contamination. This combination makes the HI 1285-5 particularly designed to withstand harsh environments such as fertilizer solutions.
Features:
Water resistant
On-screen tutorial messages for calibration
Switch parameters at the touch of a button
Automatic Temperature Compensation for pH and conductivity
Simple calibration; Dials located on the front panel makes calibration quick and simple, even for non-technical users
BEPS ( Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings
Battery % displayed on startup
Fast response probe included
Specification:
Range pH 0.0 to 14.0 pH
EC 0 to 6000 µS/cm
TDS 0 to 3000 mg/L (ppm)
Temperature 0 to 60°C
Resolution pH 0.1 pH
EC 10 µS/cm
TDS 10 mg/L
Temperature 0°C
Accuracy pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature ±0.5°C
TDS Conversion Factor 0.5 mg/L = 1 µS/cm
Calibration manual at 1 point (all parameters except temperature)
Temperature Compensation Automatic, 0 to 50°C with ß = 2%/°C (EC/TDS only)
Probe HI 1285-5 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor, 8-pin DIN connector and 1 m (3.3’) cable (included)
Battery Type / Life 9V / approximately 150 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 145 x 80 x 36 mm (5.7 x 3.1 x 1.4”)
Weight 230 g (8.1 oz.)

