PHENIX Technologies LD100 100 KVAC Oil Dielectric Test Set

PHENIX Technologies’ Liquid Dielectric Test Sets are designed to measure the breakdown voltage of insulating fluids used in transformers, capacitors, bushings and related high voltage equipment. The units are portable and may be used for either on-site or laboratory testing. Two other models rated at 75 and 100 kV are available.

Testing Capacity. 
These test sets are available with different types of testing cells which are used to hold the liquid during the test. The test sets, with the appropriate test cells, are capable of performing tests to conform to the following standards: ASTM D1816 and D877, IEC 156, BS148, VDE 0370, and other applicable standards.

Features
Operating Safety features include an enclosed test chamber with a transparent cover, cover safety switch, and zero-start interlock on the high voltage output
Output Voltage is continuously increased from 0 to the breakdown voltage. The rate of rise may be selected at 500, 2000, or 3000 volts per second (LD60) and 2000 volts per second or continuously variable (LD75 and LD100)
Simplified Operation is achieved with the use of cradle contacts for the test cell. The liquid to be tested is placed in the test cell. The test cell is then placed inside the test cage on the cradle contacts
Single Range digital meter is used to record the breakdown voltage. The meter is reset with a switch
Operating Controls are conveniently grouped on the front panel. These include a large, easy-to-read meter, on/off switch with pilot lamp, a rate of rise selector switch, plus a start/reset switch. When a breakdown of the liquid occurs, a failure lamp will light and the meter will lock on the break-down voltage
Motorized Stirrer is available for testing in accordance with ASTM D1816. A power outlet is located in the test chamber for this test cell
Made in the USA

Model        LD60        LD75        LD100
Input*    120 VAC, 60 Hz or 220 VAC, 50 Hz
*Must be specified
Output        0-60 kV, RMS    0-75 kV, RMS    0-100 kV, RMS
Rates of Rise    0.5, 2, 3 kV/s    2 kV/s Variable    2 kV/s Variable

Metering
Metering Range    0-60.0 kV    0-75.0 kV    0-100 kV
Metering Type    Digital
Metering Accuracy    +/- 1% FS
Size in. (mm)    21 ¼ W x 16 ¾ D x 13 ¾ H
(540) x (426) x (350)    30 W x 18 D x 13 H
(762) x (457) x ( 330)    36 W x 20 D x 16 H
(914) x (508) x (406)
Weight lb. (kg)    50 (23)    120 (54)    135 (61)

Include Set:
Dielectric Oil Tester
Power Cord
User Manual
 
(Optional) Test cells for the appropriate testing standard (see Accessories tab)
(Optional) Comparison meter (see Accessories tab)