- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
KEITHLEY DAQ6510 6-1/2 Digit Data Acquisition and Logging Multimeter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Keithley DAQ6510 Keithley DAQ6510 Data Acquisition and Logging Multimeter System creates a new level of simplicity, when compared with the often complicated configuration and control found in many stand-alone solutions. A large 5-inch multi-touch display will guide users through set-up, data visualization, and analysis.
Features:
Large, 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
2-year specified, full featured, traceable 6-1/2 digit multimeter with 0.0025% DCV (1 V, 10 V ranges) basic accuracy
Standard LAN/LXI and USB-TMC communication interfaces
Optional interfaces (not included): GPIB, RS-232 and TSP-Link Technology
12 different switch, RF, and control modules to connect to as many as 80 DUTs in one test setup
Up to 80 2-pole channels of thermocouple, RTD, or thermistor temperature measurements
Scanning speeds as high as 800 channels/second with solid state relay module
Front panel jacks for stand-alone DMM operation
KickStart coding-free instrument control software with data acquisition and logging application
Include:
1 - 6-1/2 Digit Data Acquisition and Logging Multimeter System (DAQ6510)
1 - Pair of General Purpose Test Leads, 1000V Cat II (1757)
1 - Type-A-to-Type-B USB Cable, 1m (USB-B-1)
1 - Traceable Calibration Certificate