- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
FLUKE 233 Remote Display Digital Multimeter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Fluke 233 True-RMS remote display digital multimeter allows you to be in two places at once. The removable display gives the user ultimate flexibility in unusual measurement scenarios. The display can be placed where you can see it and the meter where it is convenient. The removable display eliminates the dilemma of trying to take measurements in hard-to-reach places, or taking measurements in machines or panels that are physically separated from a limit or isolated switch. Low power wireless technology allows the display to be up to 10 meters (33 ft) away from the point of measurement.
Fluke 233 multimeters feature True-RMS AC voltage and current for accurate measurements on non-linear signals. The meter measures up to 1000V AC and DC and measures up to 10A. The capacitance range is 10,000 µF, frequency to 50 kHz and a built-in thermometer conveniently takes temperature readings with the same instrument. The meter also has resistance, continuity and diode tests. When the display is connected to the meter, the radio transmitter automatically turns off and the Fluke 233 can be used as a conventional multimeter.
Features:
True RMS AC voltage and current for accurate measurements on non-linear signals
Measure up to 1000 VAC and DC
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 50 kHz
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Resistance, continuity and diode test
Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
The removable magnetic display can be conveniently mounted where it is easily seen
Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
Use as a conventional multimeter when the display is connected
Radio transmitter automatically turns off when the display is connected to the meter
Auto power off maximizes battery life
Min/Max and Average recording to capture variations automatically
Test continuity and diodes
Easy to read display with large digits and bright backlight
Battery life approximately 400 hours
What's In The Box:
(1) Test leads
(1) Alligator clips
(1) 80BK-A temperature probe
(1) Manual
(1) CD-ROM
(2) AA Batteries

