- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
ACCUMAX XP4000 AccuPRO 3-In-1 Radiometer/ Photometers
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Spectroline XP-4000 AccuPRO Plus 3-in-1 Sensor Display Meter is lightweight, rugged, and simple to use. Whether you're in the field or factory, these units are ideal anywhere accurate light measurements are required. The 3-in-1 multi-purpose sensor measures ultraviolet, visible, and blue light. The AccuPRO features a user-defined power save and automatic shutoff. A protective rubber housing ensures a better grip and helps prevent accidental breakage. The sensor, attached to the meter by a 3 ft cord, is also sealed with water-resistant housing.
Wavelength/Measurement Range for this meter is 0-100 mW/cm2 for UV-A Irradiance (365 nm), 0-100 mW/cm2 for Blue (450 nm), and 0-5,382 Lux (0-500 fc) for Visible Illuminance (555 nm).
Features:
Complies with ASTM specifications for MPI and FPI
Convenient on-board charging
Multilingual display settings at any operational level - English, Spanish, German, French, and Chinese
Automatic shutoff and user-defined power save
One-touch PEAK with reset functions
Superior band-pass interference filter provides excellent cosine response
Simple to use three-button interface
Large, easy to read LCD screen with 4-digit auto-ranging display
Packing:
AccuPRO Plus 3-in-1 Sensor
Display Meter
(4) Rechargeable AAA Nickel-Metal Hydride Batteries
AC Charger
Carrying Case

