- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
KIMO LX200 Portable Lux / Light Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Digital light meter, Class C, as per NF C 42-710 norm (0 to 150 000 lux)
LX200 - Max - min Hold - Relative - Uniformity - Time evolution - Mapping. Supplied with data processing software, calibration certificate and transport case.
Measuring range :
- Lux : From 0.0 to 200 000 Lux
- Fc : From 0.00 to 8585 fc
Resolution : 0.01 lux / 0.01 fc
Accuracy : ±2% of reading or ±2 lux / ±0.19 fc
Linearity : < 2%
Measurement capability : From 04h30 to 99 days
Display : Backlit LCD graphic 128 x 64 pixels
Conditions of use (°C/%RH/m) : From 0°C to +50°C. In non-condensation condition. From 0 to 2000 m.
Storage temperature : From 0°C to +50°C
Mini-USB plug : For USB power supply adaptor
Power supply : 3 batteries 1.5 V type LR3-AAA
Supplied with : LX200 housing with silicon photodiode sensor and glass filter correction, Transport case, 3 batteries LR3-AAA, Calibration certificate, LX200 user manual, LLX200 software

