KEITHLEY 6485 5½ Digit Picoammeter

The 5½-digit Model 6485 Picoammeter combines Keithley’s expertise in sensitive current measurement instrumentation with enhanced speed and a robust design. With eight current measurement ranges and high speed autoranging, this cost-effective instrument can measure currents from 20fA to 20mA, taking measurements at speeds up to 1000 readings per second.

The Model 6485’s 10fA resolution and superior sensitivity make it well suited for characterizing low current phenomena, while its 20mA range lets it measure currents high enough for applications such as measuring 4-20mA sensor loops.

Although it employs the latest current measurement technology, it is significantly less expensive than other instruments that perform similar functions, such as optical power meters, competitive picoammeters, or user-designed solutions. With a price that’s comparable to a general purpose DMM, the Model 6485 makes picoamp-level measurements affordable for virtually any laboratory or production floor.

Features 
Scaled voltage analog output. This output allows the Model 6485 to transmit measurement results to devices like DMMs, data acquisition boards, oscilloscopes, or strip chart recorders.
220V overload protection. This high overload protection and a robust design let the Model 6485 withstand abusive overflows.
One-touch front panel design. Functions can be configured easily with the push of a button, without complicated function menus.
Built-in Trigger Link interface. The Trigger Link interface simplifies synchronizing the Model 6485 with other instruments and voltage sources. This interface combines six independent selectable trigger lines on a single connector for simple, direct control over all instruments in a system.
RS-232 and IEEE-488 interfaces. These interfaces make it easy to integrate the Model 6485 into automated test and measurement systems.
Display on/off switch. For research on light-sensitive components, such as measuring the dark currents of photodiodes, the front panel display can be switched off to avoid introducing light that could significantly reduce the accuracy of the results.
REL and LOG functions. The Model 6485 can make relative readings with respect to a baseline value or display the logarithm of the absolute value of the measured current.
Resistance calculations. The Model 6485 can calculate resistance by dividing an externally sourced voltage value by the measured current.
Rear panel BNC inputs. Inexpensive, easy-to-use BNC cables can be employed, rather than more expensive triax cables.

Application
Beam monitoring and radiation monitoring
Leakage current testing in insulators, switches, relays, and other components
SEM beam current measurements
Galvanic coupling measurements
Optoelectronic device testing and characterization
Optical fiber alignment
Circuit test and analysis in DCLF circuits
Sensor characterization
I-V measurements of semiconductors and other devices
Nanoelectronic device characterization
Capacitor leakage
Teaching labs