- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
FLUKE 1662 Multifuntion Installation Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Fluke 1662 multifunction installation tester is used to verify the safety of electrical installations in domestic, commercial and industrial applications. The 1662 puts more power in your hands by quickly and efficiently ensuring that fixed wiring is correctly installed to meet the requirements of IEC 60364 and all relevant local standards, thus protecting workers as well as appliances that are connected to the system under test.
The Fluke 1662 has a wide range of measurement functions including: voltage trms (ac and dc) and frequency, wiring polarity checker (detects broken PE and N wires), insulation resistance, continuity and resistance, measurement of motor windings with continuity test, loop and line resistance, prospective earth fault current (PEFC/IK), prospective short-circuit current (PSC/IK), RCD trip time, RCD trip current (ramp test), measurement of trip time and current for RCD type A and AC in one test, RCD variable test current, automatic RCD test sequence, and phase sequence test. This provides users all the testing power needed for basic installation testing.
Designed with Fluke reliability and simple operation, the 1662 includes an Auto Test function that performs five required installation tests in one sequence, including selectable Type A, AC & RCD Auto Test, ensuring compliance with local installation regulations. It reduces the number of manual connections, decreases the possibility of making errors and reduces test time.
Features:
RCD tripping current level ramp test
RCD auto test & ramp test
Pulsating DC sensitive RCD tests (G & S-type)
Remote Probe
Quickly and efficiently testing to all local regulations
Protecting appliances that may be inadvertently connected to the system under test
Making it easy to share test results over your smartphone
Performing 8 key tests with one button press, reducing test time up to 40%
Primary Channels: Electrical, Maintenance, Process, Industrial (no restrictions)
Faster, easier testing with Auto Test
What's In The Box:
(1) TP165X remote control probe and lead
(1) Standard test lead set
(1) Zero adapter
(1) C1600 hard carrying case
(1) Heavy duty mains cord
(1) Padded carrying and waist strap
(6) AA (IEC LR6) cell batteries
(1) Quick reference guide
(1) User's manual on CD-ROM