- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
MEGGER MIT400/2 Insulation and Continuity Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Megger MIT400/2 (1006-719) Insulation and Continuity Tester is designed not only for electrical and industrial testing, but also has an exceptionally wide range of applications in electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance, and more. The insulation testing of the MIT400/2 has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. In addition, continuity testing is now significantly faster, and a single auto-ranging 0.01 ohms to 1.0 Megaohm function replaces the "ohms" and "kOhms" ranges.
The MIT400/2 features a rugged case, back-stand, and 6 cell battery compartment with separate fuse access. It is over-molded for increased protection and achieves an IP54 weatherproof rating.
Insulation Resistance Testing.
The stabilized insulation test voltage for the MIT400/2 is accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without the risk of over-voltage damage to circuits or components. The output voltage is maintained between 0 and 2% throughout the test range.
Features:
Ideal for electrical and industrial testing
Performs insulation testing up to 1000 V and 200 Gigaohms range
Includes Polarization Index (PI) and Dielectric Absorption Ratio (DAR) functions
Carries out fast continuity testing with single range from 0.01 ohms to 1 Megaohm
Stabilized insulation test voltage allows for higher accuracy
Indicates PASS or FAIL depending on threshold voltage
Automatically performs tests to a time limit with timed testing function
Measures frequency between 15 Hz and 400 Hz
Measures voltage up to 600 V TRMS AC and 600 V DC
Display combines analog arc with dual digital readout
Detects live voltages and inhibits insulation testing above user-selected thresholds
Suitable for use on CAT IV applications and supply voltages to 600 V
Tough, ABS housing absorbs shocks and provides excellent grip
Weatherproof case rated to IP54
What's In The Box:
(1) MIT410/2 Insulation Tester (1006-732)
(1) Red/Black Silicone Test Leads with Probes and Clips (1002-001)
(1) SP5 Remote Switch Probe (1007-157)
(1) Informational CD
(6) AA Alkaline Batteries (23415)
(1) Carrying Case (1007-886)