SOURCETRONIC ST9201C Hipot Tester

The compact design of the ST9200 hipot tester makes it suitable for use in almost every area and scenario. The wide variety of possible interfaces and uses include as an RS232, a handler, remote I/O, USB, or GPIB, this hipot tester is ideally suited for use in all automatic test systems. The tester is also perfect for use in a manual workstation, this would utilise the warning light and the safety test probes designed to be operated in a two-handed system. All of the 9200 hipot tester are built with the ARC detection feature, which will automatically micro-discharge a partial part of the insulation. The ST9200 also allows you to control the high voltage using a ramp function, conveniently located on the tester. GO-NOGO-Comparators are projected on the display using a red/green LED, optional the built-in speaker will emit an acoustic warning. The hipot tester houses a large LCD display to offer clear reading of the values from all angles. The ST9201S also has a built-in switch matrix with 8 channels which allows you to switch the high voltage from one point to another.

Highlights
Voltage: 5000V AC
240×64 Dot-matrix graphic LCD
Adjustable ramp time (rise and fall)
Test steps programmable
GO-NOGO-Comparator
One view: nominal value & actual value
High safety: GR, GFI, fast discharge
RS-232C, Handler and SCAN Interface
Incl. HV accessories

Technical data
Memory: 50groups, 100 steps per group, totally 500 steps
Voltage rise-time: 0.1s - 999s
Voltage fall-time: 0.1s - 999s
Test time setting 0.3s - 999s
 and arc detection function
Body protection function
Built-in 8-channel matrix scanner for convenient use
Set voltage rising time, test time, and voltage dropping time
randomly for different load, DC withstanding voltage current
judging & waiting time
100 test steps being stored per group, totally 50 groups, and the
total testing steps are limited at 500
Current base number correction function
Interfaces: USB, RS232, HANDLER, REMOTE I/O, SCAN
Power supply:  230V / 50 Hz
Dimensions (W/H/D) : 340/120/438.50 mm
Weight: 20kg
CE- conformity
Test methods

Withstanding voltage test
- Output voltage
- AC: 0.05kV — 5kV ± 1.0% of reading + 5 digit, (50Hz ,60Hz optional) 
- Voltage adjustment rate: ≤ 1.0% +10V (rated power)
- Current test range
- AC: 0.1mA - 20mA
- Measurement range:     AC: 1mA - 15mA           

What's in the box:
ST90001R HV connection cable with test clip
ST90001B HV Earth connection cable with test clip
ST90002 HV Test probe
Power cord
User manual
Factory calibration