- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
PCE DSD-A Shore A Portable Hardness Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
PCE-DSD-A Durometer Digital durometer measures Shore A hardness in rubbers, plastics and other nonmetals in accordance with ISO 7619, ISO 868 and ASTM D 2240 standards.
PCE-DSD-A is a digital hardness tester or durometer used for quick and accurate measurement of the surface hardness of rubber, plastic and other nonmetals. Ideal for use in manufacturing production and quality assurance as well as in inbound and outbound control applications, this Shore A durometer comes precisely calibrated to help manufacturers ensure the best quality materials are obtained and the best quality products are produced. Thus, this durometer helps manufacturing companies save money by preventing costly returns of manufactured parts.
Designed with high-quality components to provide years of accurate measurements, this handheld durometer works by measuring soft to semi-soft materials' resistance to indentation. The included protective carrying case allows for ease of portability.
The PCE-DSD-A portable durometer is a battery powered hardness tester that can be held quite comfortably while performing measurements, so test samples do not need to be transported to a stationary machine or laboratory for review. Measurements can be taken on the spot. However, if the instrument is used daily, it is recommended that, in addition to the handheld durometer, a test stand is acquired. Furthermore, optional software specifically tailored to the PCE-DSD-A durometer can be obtained, so measurement data can be transferred to a computer for further analysis.
Features:
Comes calibrated to the highest standards (factory calibration certificate included)
Measures Shore A hardness in rubbers, plastics and other nonmetals in units from 0.5 to 100 in accordance with ISO 7619, ISO 868 and ASTM 2240 standards
Features an easy-to-read LCD display with backlight
Offers a fine tip for precise measuring results
Contains a USB port / RS-232 data interface
Affords maximum hold functionality
What's In The Box:
(1) PCE-DSD-A hardness tester
(1) Battery
(1) External power supply cable
(1) Factory calibration certificate
(1) Protective carrying case
(1) User manual