DRAGER X-AM 5000 Portable Multi Gas Detector

The Dräger X-am® 5000 belongs to a generation of gas detectors, developed
especially for personal monitoring applications. This 1- to 5-gas detector
reliably measures combustible gases and vapors as well as O2 and harmful
concentrations of toxic gases, organic vapors, odorant and amine.

Technical Data
08 | Dräger X-am® 5000
Dimensions (W x H x D) 48 x 130 x 44 mm;
1.89 x 5.12 x 1.73 in.
Weight 220 – 250 g; 7.8 – 8.8 oz.
Temperature -20 – +50 °C; -4 – 122 °F
Pressure 700 – 1,300 hPa
Ambient conditions
Humidity 10 – 95% r.h.
Visual 360°
Audible Multi-tone > 90 dB at 30 cm
Alarms
Vibrating
Ingress Protection IP67
Operating time > 12 hours with Alkaline and NiMH;
> 13 hours with NiMH HC; without Ex Sensor typ.
> 250 hours with Alkaline Battery; when using the Save Energy Mode > 40 hours
Charging time < 4 hours
Data logger Can be read out via Infrared > 1,000 hours with 5 gases and a recording interval of
1 value per minute
Pump operation Maximum hose length 45 m; 147 ft.
I M1 Ex ia I Ma, II 1G Ex ia IIC T3 Ga, I M2 Ex d ia I Mb,
II 2G Ex d ia IIC T4 / T3 Gb
Performance approval to:
ATEX
EN 50104 (2002) + A1 (2004)
EN 45544
EN 60079-29-1:2007
EN 50271:2010
O2
CO & H2S
Methane to nonane
Software and documentation
CSA Class I, Div. 1 Group A, B, C, D T.-Code T4 / T3
IECEx Ex ia I
Ex ia IIC T3
Ex d ia I
Ex d ia IIC T4/T3
CE-mark Electromagnetic compatibility Directive 2004 / 108 / EG;
EN 50270:2006
EAC PO Ex ia I X
0 Ex ia IIC T4 / T3 X
MED Marine Equipment Directive 96 / 98 / EC
Approvals
MSHA

Ordering Information
Dräger X-am® 5000 2)
Consisting of: basic instrument with an integrated data logger and
manufacturer's and calibration certificates.
A functional instrument must include up to 4 sensors and a power
supply unit.