- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
HANNA HI9147 Portable Dissolved Oxygen Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
HI 9147 is designed for aquaculture applications. This unit is unique among our family of DO meters as it is supplied with a galvanic probe.
Unlike polarographic probes, galvanic DO probes require no conditioning time. When you need to measure multiple samples in a given period of time, pick it up and measure on demand.
HI 9147 is a must have for DO sensitive organisms or high bio-load environments.
Features:
Designed specifically for aquaculture
Galvanic DO probe
Backlit LCD
Automatic Temperature Compensation
Manual salinity and altitude compensation
Water-resistant
Specification:
Range O2 0.0 to 50.0 mg/L (ppm)
% Saturation O2 0 to 600 %
Temperature -5.0 to 50.0°C (32.0 to 122.0ºF)
Resolution O2 0.1 mg/L (ppm) or 1%
Temperature 0.1°C (1ºF)
Accuracy (@20°C) O2 ±1% of reading
Temperature ±0.2°C (1ºF) (excluding probe error)
Calibration manual, in saturated air
Temperature
Compensation automatic, -5 to 50°C (23°F to 122°F)
Salinity
Compensation 0 to 4000 m (resolution 100 m)
Salinity
Compensation 0 to 51 g/L (ppt) (1 g/L resolution)
Battery Type /
Life 1.5V AAA (3) / approx. 1,000 hours of continuous use without backlight
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 185 x 72 x 36 mm (7.3 x 2.8 x 1.4”)
Weight 450 g (15.9 oz.)

