- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
ESECO Speedmaster SM12 Portable Densitometer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Speedmaster "Pocket Pal" SM-12 has been designed to meet industry's needs for a small portable densitometer. With a range of 0 to 4.00D, the "Pocket Pal" provides a quick and effective method to verify that your B&W or x-ray film processor meets all quality control requirements. No separate light source is required, just insert the film, align the area to be read, and press a button.
The SM-12 has alignment marks for easy film positioning. Exposed and processed control film should have a density patch at least 0.2" (5mm) wide to avoid critical alignment. The push button switch "wakes up" the PocketPal with a stable reading in 1 second. The digital display indicates density values from 0.00D to 4.00D in 0.01 increments. SM-12 readings are calibrated for films with silver emulsions. Convenient nylon protective carrying case is optional.
Convenient Pocket Size (4.5"×2.5"×1.15" or 114.3mm×65.5mm×29.2mm; Weight 5.9 oz. or 167.2 grams)
Portable Battery Operation (9 volt Alkaline Battery Included)
Digital Display of Film Densities
Reliable Accuracy
Consistent Reading Results
Push Button for Instant Readings
Internal Light Source
Low Battery Indicator
Temperature Stabilized Readings
High Density and Low Density Calibration
One Year Warranty (battery excluded)