EUTECH CON2700 Benchtop Conductivity Meter

Eutech Instruments understands that the most precious things in a laboratory are time, budget, and space. Each is important but only if they do not sacrifice measurement accuracy. That was the basis behind development of (5) benchtop models for measurement of pH, redox/ORP, ion, conductivity, TDS, salinity, resistivity, dissolved oxygen, and temperature. The Eutech 2700 series Benchtop Meters represent a perfect combination of simplicity and affordability for any laboratory. The first thing to notice is the generous, back-lit display with easy-to-read fonts. Along with the primary display, users are able to view temperature, electrode status, calibration points, as well as date and time simultaneously at-a-glance. Eutech Instruments reduced their existing overall benchtop footprint design by 40%, saving valuable space to fit into today’s crowded laboratories. By incorporating an integral electrode arm into the housing and offering right or left-handed positioning, space is conserved further still. In contrast, free-standing electrode holders can often double the space required for routine measurement!

Meter is encased in a compact 6-1/ 8 " L x 6-7/ 8 " W x 2-3/ 4 " ( 15.5 x 17.5 x 6.9 cm) housing which takes up a minimum of bench space-nearly 40% less space than comparable meters. Water-resistant membrane keypad and convenient pullout reference guide provide useful features for the lab. Oversized display measures 3-1D4 " x 2-7D16 " ( 8.3 x 6.2 cm) and is brightly lit for easy viewing of measurements. Display shows conductivity or TDS and temperature and has a “ ready” indicator and Hold function.
Additional meters features include datalogging capabilities up to 100 points, a built-in electrode stand that is switchable to either side of the meter, and selectable ° F/ ° C temperature measurement.

Features: 
An affordable way to take consistent, accurate conductivity measurements in your laboratory! 
Compact size frees up bench space
Large brightly lit display allows for easy reading of measured values
Easily toggle between conductivity and TDS at the touch of a button! 

Specifications: 
Resolution: 0.01, 0.1, 1 µ S; 0.01, 0.1 mS; 0.01, 0.1, 1 ppm; 0.01, 0.1 ppt
Accuracy: ± 1% full-scale
Units of Measurement: 0.0 to 20.00, 0 to 200.0, 0 to 2000 µ S; 0 to 20.00, 0 to 200.0 mS; 0.00 to 100.0 ppt
ATC: Yes ( 0 to 100° C) 
Operating Modes: CON, TDS

Includes: Conductivity/ temperature probe WD-35608-74 ( K = 1.0) , built-in electrode stand, and 100 to 240 VAC power adapter.