Categories
- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
Coating Thickness
The BESANTEK BST-CTG03 2 In 1 Digital Coating Thickness Meter Designed for Measurement of Ferromagne..
Rp. 16,500,000
The BESANTEK Corporation BST-CTG04 2-In-1 Digital Coating Thickness Gauge is designed for the measur..
Rp. 18,500,000
The 3000EZ Series Coating Thickness Gauge provides fast, non-destructive, accurate coating measureme..
Rp. 22,500,000
The 3000EZ Series Coating Thickness Gauge provides fast, non-destructive, accurate coating measureme..
Rp. 28,500,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 30,000,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 38,500,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 30,000,000
Range 0 to 1 inch (0-25 mm)
Resolution 0.0001 inch (0.002 mm)
The Standard MTG Mater..
Rp. 75,000,000
PaintCheck provides fast, non-destructive coating thickness measurements on steel and non-ferrous me..
Rp. 19,500,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 65,000,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 90,000,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 90,000,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 115,000,000
Dakota NDT CX Series Ultrasonic Material Thickness Gauge. The Dakota CX Ultrasonic Material Thicknes..
Rp. 45,000,000
Dakota NDT CX Series Ultrasonic Material Thickness Gauge. The Dakota CX Ultrasonic Material Thicknes..
Rp. 55,000,000
Dakota NDT CX Series Ultrasonic Material Thickness Gauge. The Dakota CX Ultrasonic Material Thicknes..
Rp. 68,500,000
Dakota NDT CX Series Ultrasonic Material Thickness Gauge. The Dakota CX Ultrasonic Material Thicknes..
Rp. 85,000,000
The MTG-99 series is simple to use to non-destructively measure the thickness of any non-ferrous mat..
Rp. 325,000,000
The Danatronics PR-1 Standard Hall Effect Probe for use with the Standard and Extended Range Hall Ef..
Rp. 55,000,000
The PosiPen is a magnetic pull-off coating thickness gauge. It is designed to measure non-magnetic c..
Rp. 12,500,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 85,000,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 75,000,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 95,000,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 78,500,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 115,000,000
The PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound..
Rp. 85,000,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 42,500,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 48,500,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 38,500,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 42,500,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 145,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 155,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 175,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 135,000,000
Features:
Two Models
DFT-F measures non-magnetic coatings on steel.
DFT-FN, measures both non-mag..
Rp. 28,500,000
Features:
Two Models
DFT-F measures non-magnetic coatings on steel.
DFT-FN, measures both non-mag..
Rp. 21,500,000
For the non-destructive measurement of nonmagnetic coatings such as (paint, enamel, plastic, galvani..
Rp. 18,500,000
For the non-destructive measurement of nonmagnetic coatings such as (paint, enamel, plastic, galvani..
Rp. 18,500,000
The PosiTest PG Paint Inspection Gage The PosiTest PG Paint Inspection Gage measures the thickness o..
Rp. 38,500,000
The Positest-PC measures uncured powder coatings using non-contact ultrasonic technology to predict ..
Rp. 78,500,000
Product Description
In addition to the Model E features, Model B features an automatic rotating dis..
Rp. 25,000,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 35,000,000
Product Description
All New Elcometer 456 Basic Ferrous and Non-Ferrous metal substrate coating thi..
Rp. 35,000,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 42,500,000
All New Elcometer 456 Basic Non-Ferrous Metal Substrate Coating Thickness Gauge with Integral Probe
..
Rp. 25,000,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 32,500,000
MikroTest is an extremely robust coating thickness gauge, which measures the thickness of non-magnet..
Rp. 32,500,000
Coating Thickness Gauge for quick, precise and non destructive measurement of Electroplating, Nickel..
Rp. 28,500,000
MiniTest 2500 - Basic Model with memory and USB output
MiniTest 4500 - Adds Batch Memory, Bluetooth..
Rp. 50,000,000
MiniTest 2500 - Basic Model with memory and USB output
MiniTest 4500 - Adds Batch Memory, Bluetooth..
Rp. 65,000,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 35,000,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 45,000,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 38,500,000
The MiniTest 70 is a lightweight and handy coating thickness gauge (dft gauge) in a pencil format wi..
Rp. 22,500,000
The MiniTest 70 is a lightweight and handy coating thickness gauge (dft gauge) in a pencil format wi..
Rp. 25,000,000
The new MiniTest 725 coating thickness gauge is the solution to all your coating thickness problems ..
Rp. 40,000,000
The new MiniTest 725 coating thickness gauge is the solution to all your coating thickness problems ..
Rp. 36,500,000
The new MiniTest 700 Series Coating Thickness Gauges offer a reliable and accurate solution to all y..
Rp. 55,000,000
The MiniTest 735 coating thickness gauge is the solution to all your coating thickness problems wher..
Rp. 50,000,000
The MiniTest 735 coating thickness gauge is the solution to all your coating thickness problems wher..
Rp. 75,000,000
The MiniTest 735 coating thickness gauge is the solution to all your coating thickness problems wher..
Rp. 70,000,000
The MiniTest FH magnetic thickness gauge is designed for non-destructive measurements up to 24mm / 1..
Rp. 325,000,000
Product Description
The Mitech MCT200 Coating Thickness Gauge is a portable coating thickness gauge..
Rp. 18,500,000
Portable Coating Thickness Gauge NOVOTEST TP-1M – device for operative non-destructive measuring of ..
Rp. 55,000,000
PCE-CT 100 Thickness Gauge Non-destructive coating and dry film thickness (DFT) measuring device for..
Rp. 48,500,000
Thickness Meter for Ferrous and Non-Ferrous Metals (NFe and Fe Probes)
Automotive tester PCE-CT 100..
Rp. 55,000,000
Coating Thickness Tester with Internal Probe
Material Tester with 5-point calibration / various int..
Rp. 23,500,000
Ferrous and Non-Ferrous Metals Coating Thickness Tester with External Probe
Material Tester with 5-..
Rp. 26,500,000
Thickness gauge PCE-CT 24FN Thickness gauge with statistics function / Limit alarm function / Mains ..
Rp. 18,500,000
The Coating Thickness Meter is used for the quick and precise detection of layer thicknesses on meta..
Rp. 18,500,000
Thickness gauge PCE-CT 26FN For iron and non-ferrous substrates / Large measuring range / Rotatable ..
Rp. 18,500,000
PCE-CT 27FN is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, ins..
Rp. 35,000,000
The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ..
Rp. 22,500,000
The PCE-CT 30 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, i..
Rp. 32,500,000
PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insul..
Rp. 28,500,000
PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thickne..
Rp. 18,500,000
Coating thickness gauge PCE-CT 80-ICA incl. ISO calibration certificate Coating thickness gauge for ..
Rp. 28,500,000
The Phase II PTG-4000 coating thickness gauge can perform two different methods of calculating thick..
Rp. 25,000,000
The Phase II PTG-4200 coating thickness gauge can perform two different methods of calculating thick..
Rp. 22,500,000
The PHASE II PTG-5500 coating thickness gauge can perform two different methods of calculating coati..
Rp. 28,500,000
This coating thickness gauge is designed for non‐invasive coating thickness measurements. The R7800 ..
Rp. 23,500,000
Description
Developed by TQC Sheen, our paint testing specialist brand, the SuperPIG Paint Inspecti..
Rp. 48,500,000
The BB20 has an innovative dual sensor which enables you to measure the thickness of non-magnetic co..
Rp. 13,500,000
The With the BB30 you can quickly and accurately determine the strength of non-magnetic layers, such..
Rp. 15,000,000
Showing 1 to 84 of 84 (1 Pages)