YOKOGAWA CL220 Clamp On AC/DC Current Tester

Rp. 22,500,000

NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.

Features:
Light weight & compact design
Mean value display
AC Current: 40/300A
24mm in diameter of measurable conductor
Sleep function
Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)

General Specifications
Parameter   Specification
Method of Detection   Mean Value
Diameter of Measurable conductor   Ø24MM at maximum
Display   LCD (Digital Display: 3999 Counts)
Response Time (Approx.)   2 Seconds
Range Switching   Auto-Range
Data Hold   On All range
Ambient Temperature and Humidity   0-40˚C, 85% RH or less (no condensation)
Influence of external Magnetic Field   1A or less at 400 A/m
Influence of Conductor Position   ±(2% rdg + 5dgt)or Less
Circuit Voltage   300Vrms or less
Withstanding Voltage   3.7kV AC for one minute
Power Supply   LR-44 x2(3V) or SR-44 x2
Battery Life   Approx. 11 hours (continuous)
Consumed Current   Approx. 9mA
Sleep Function   Automatically powered down in about 5 minutes after last switch operation
Dimensions   Approx. 59(W)x147(H)x25(D)mm
Weight   Approx. 100g