MYRON 4PII Ultrameter II

The Myron L Company FCE function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L Company FCE function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

Accuracy you Can Trust
Both Ultrameter II models deliver performance of ±1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor and powerful microprocessor-based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration.

4P Ultrameter II bluDock capable
Choice of KCl, NaCl, and 442 Natural water Standards
ORP mV to ppm free chlorine conversion (6PFC E )
pH/ORP Sensor protective cap (6PFC E )
Four-digit display for full 9999 readings, with autoranging capability up to 200 mS/200 ppt.
Powerful microprocessor based surface-mount circuitry
Display prompts for simple pH calibration
Memory for 100 readings with Date & Time Stamp
Real Time Clock
Factory calibrations stored in microprocessor.

ULTRAMETER II™ Applications:
Irrigation Water
Hydroponics
Laboratories
Homeland Security
Reverse Osmosis
Deionization
Wastewater
Cooling Towers
Environmental
Desalination
Fountain Solutions

Ultrameter II™ 6PFCᴱ & 4P Accessories:
bluDock™ Accessory Package includes bluDock, Macintosh/PC application software (Guardian2 TM) for downloading data and printed instructions. model: BLUDOCK

Certificates confirming the NIST traceability of an Ultrameter II are available (must be specified when placing instrument order). model: MC
Conductivity Standard Solutions are necessary to maintain accuracy and for periodic calibration of conductivity/TDS parameters. All Standard Solutions are NIST traceable for your complete confidence. Recommended values: KCl- 7000 (7 mS), 442-3000 (TDS), or NaCl-14.0 (mS) available in 2 oz/59 mL, 1 qt/1 L, and 1 gal/3,8 L.
pH Buffers are necessary to maintain accuracy and for periodic calibration of pH and ORP parameters. Calibration with pH 7 Buffer is especially important. All pH 4, 7, and 10 Buffers are NIST traceable and are available in 2 oz/59 mL, 1 qt/1 L, and 1 gal/3,8 L.
pH/ORP Sensor Storage Solution is available in 2 oz/59 mL, 1 qt/1 L, and 1 gal/3,8 L. model: SS20Z, SSQ and SSG
Certificate of NIST traceability for pH Buffer or Conductivity Standard Solutions are available (must be specified when placing solution order). model: SC
Hard protective case (small)model: UPP
Hard protective case (kit) with three buffers (pH 4, 7, and 10), one pH/ORP storage solution, and two standard solutions, (KCI-7000 and 442-3000). All bottles are 2 oz/59 mL. model: PKUU
Soft protective case is constructed of padded Nylon and features a belt clip for hands-free mobility. model: UCC (Blue) UCCDT (Desert Tan)
Replacement pH/ORP sensor is user-replaceable and features a unique/porous liquid-junction. model: RPR
ORP Sensor Conditioner Solution for precision ORP readings. model: ORPCOND
Conductivity Standard Solutions: Two-ounce (59 mL) bottles of 442-3000 (for 3000 ppm/µS solutions) and KCl-7000 (for 7000 µS solution) standards.