Categories
- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
AMETEK Crystal HPC51 Intrinsically Safe Single Pressure Calibrator
Rp. 155,000,000
NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator combines the features from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety.
The HPC50 series pressure calibrator is fully temperature compensated for pressure, temperature, and electrical measurements from -20 to 50°C.
Features:
0.035% of reading accuracy
-4 to 122°F (-20 to 50°C) temperature compensated
Pressure to 10,000 psi / 700 bar / 70 MPa
Advanced simplicity "Non-Menu" interface
Measure Sink mA and V
High accuracy thermometer with "True Ohm" technology
Store & recall previously used screens
What's In The Box:
(1) Intrinsically Safe, Single Pressure Handheld Calibrator
(1) ISO 17025 Accredited Calibration Certificate, NIST Traceable
(3) AA batteries
(1) Your choice of adapters (1/4" NPT, 1/4" BSP, or 1/4" M20)
(1) Protective Boot—required for Intrinsic Safety
(1)Test Leads, red and black with clips
(1) Velco strap
(1) User manual
(1) Mini-USB Cable