- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHAUVIN ARNOUX CA1631 Voltage/ Current Process Calibrator
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Chauvin Arnoux CA1631 [P01654402] Voltage/Current Process Calibrator, 0 to 24mA. The Chauvin Arnoux CA1631 Voltage/Current Process Calibrator is a process-signal calibrator that can be used for calibrating instruments that measure current or voltage. It produces a DC current loop of between 0 and 24mA as well as DC voltage between 0 to 20V whilst the measurement method is also possible with this calibrator. High accuracy (±0.02% + 3) means that calibration is very reliable and the option between current/voltage generation and measurement gives the user greater flexibility on site. The straightforward push-button interface on the Chauvin Arnoux CA1631 is very easy to use and information is provided to the user on the clear digital screen. The calibrator is powered by six AAA batteries and is light and portable, thus allowing calibration on site. This not only saves time but is also more accurate because testers are calibrated in real-world conditions. Futhermore, it is possible to power the instrument through the mains for extended periods of use. The Chauvin Arnoux CA1631 benefits from a 12-month manufacturer’s warranty and comes supplied with test leads, crocodile clips and a carry case.
Part Number: P01654402
Simulates and measures DC current loop and DC voltage
DC current loop: 0 to 24mA
DC voltage: 0 to 24V
Calibrate instruments on-site and without removing them from the process
Simple-to-use
Measure and simulate low-level industry signals
Suitable for metallurgy, steel, agri-food, hospital and civil engineering sectors
Simulated signals are applied upstream of the measurement chain
Measured values can be compared to the panel meter or the simulated input value
Long battery life
Can be connected to the mains supply for continuous operation
Ideal for installers, maintenance technicians and industrial companies concerned with developing and verifying measurement chains
Include:
(1) CA1631 - Voltage/Current Process Calibrator
(2) Pairs of test wires and crocodile clip
(6) AAA 1.5 V batteries
(1) Operating manual in 5 languages
(1) Carrying bag