- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
Franklin Electric Celltron SCP100 Battery Analyzer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Franklin Electric (formerly Midtronics) SCP-100 Secure Power SCP 6/12 Battery Conductance Tester provides a simple method to screen the state-of-health of popularly sized 6-Volt and 12-Volt sealed lead-acid batteries.
The SCP 6/12 helps to ensure the operation of critical systems despite power loss. It utilizes patented conductance technology, a passive method that minimizes technician risk and battery stress. A conductance method recognized by IEEE standard for the testing of lead-acid batteries with proven correlation to battery capacity. Prioritizes battery replacements and additional testing for cost-effective system management. Test batteries used in:
Security Systems
Fire alarms
Emergency lighting
Mobility vehicles
Small UPS systems
The device features voltmeter measurements from +6.0 to +14.0 VDC, conductance measurements from 20 - 1200 siemens, CCA's from 200-850 and requires no external power source. Battery voltage and conductance are displayed in less than 10 seconds. The unit is powered by the battery under test.
The SCP-100 battery tester is supplied with dual-conductor Kelvin clamps and operations manual. The 1-pound unit is 7.5" x 3.5" x 2". It utilizes patented conductance technology, a passive method that minimizes technician risk and battery stress. This accurate method is recognized by IEEE standard for testing lead-acid batteries with proven correlation to battery capacity.