- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
TSI ALNOR 9565A VelociCalc Series Ventilation Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The TSI Alnor VelociCalc 9565 Series multi-function ventilation meters are portable, handheld instruments available with or without a differential pressure sensor. Generally used for a wide array of applications-- HVAC, clean room certification, ventilation evaluations, thermal comfort studes, IAQ investigations and process air flow testing-- the TSI Alnor VelociCalc is designed to work with a wide range of plug-in probes.
With probes designed to measure air velocity, temperature, humidity, CO and CO2, the TSI Alnor VelociCalc 9565 Series multi-function meters can calculate air flow, heat flow, turbulence, wet bulb and dew point temperature. The TSI Alnor VelociCalc 9565 Series features a large graphic display which can simultaneously display up to 5 measurements. Up to 26,500+ samples and 100 test IDs can be logged, either manually or continuously, into the internal memory. Other features of the TSI Alnor VelociCalc 9565 Series multi-function meters include TrakPro and LogDat2 software, the ability to name test IDs, and Bluetooth bidirectional communications.
TrakPro data analysis software is a Windows-based software program that works with a variety of TSI data logging instruments, including the TSI Alnor VelociCalc 9565 Series. This unique software helps you pre-program instruments, store and organize your test data, and generate detailed graphs and reports needed to effectively communicate results. The LogDat2 software transfers stored data to a computer spreadsheet program. It is necessary for downloading data from the TSI Alnor VelociCalc meters.
Features
High accuracy
Velocity range: 0 to 15,500f/m (depending on probe)
Simultaneously measures temperature and velocity
Perfect for HVAC and IAQ applications
Calculates volumetric flow and actual/standard velocity
Data logging and LogDat2 downloading software included
Displays up to three measurements simultaneously
Straight or articulated probes available
Bluetooth bi-directional communications
NIST Certificate Included
What's in the Box
Hard carrying case
4 alkaline batteries
USB cable
LogDat2 software
TrakPro software
Manual
Calibration certificate
8ft rubber tube (not w/9565-X)
Static pressure tip (not w/9565-X)

