- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
TSI ALNOR 9515 VelociCalc Air Velocity Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The TSI Alnor VelociCalc 9515 air velocity meter is a digital meter typically used for face velocity measurements in fume hoods, spray booths or IAQ and ventilation system checks. The VelociCalc 9515 features a 40-inch (101.6 cm) telescoping integrated probe for difficult to reach measurements.
With an accuracy of ±5% of reading or ±5 ft/min (±0.025 m/s), TSI Alnor VelociCalc 9515 air velocity meters measure air velocity over a range from 0 to 4000 ft/min (0 to 20 m/s). The TSI Alnor VelociCalc 9515 also measures temperatures from 0 to 200°F (-18 to 93°C) with an accuracy of ±0.5°F (±0.3°C).
Features
Accurate air velocity measurement suitable for 0 to 4,000 ft/min (0 to 20 m/s)
Integrated 40-inch (101.6 cm) telescoping probe attachment
Large, easy to read display
Calibration certificate included
Press button to hold reading
Weighs 0.6 lbs (0.27 kg)
NIST Certificate Included
What's in the Box
Hard carrying case (p/n 801752)
NIST Certificate
4 x AA batteries
Manual

